MXL-RX62H V3.0 5 Channel Micro All-in-one Receiver Built-in 5A 1S Brushed ESC

The Crossover-rx MXL-RX62H series receivers are a micro sized 5 channel all-in-one receiver with built-in 5A 1S brushed ESC and two linear servos. It features 2 independent micro JST-SH 1.00mm servo ports, and a set of solder pads to connect an external ESC. All of the Crossover-rx receivers feature a unique auto-binding system that is very user friendly. These are compatible with many readily available rotary and linear digital servos with micro JST-SH 1.00mm pitch connectors. There are also some protocols available with Telemetry back to the transmitter.

1) Size: 24.25x22.0x7.9mm (not including antenna) 2) Weight: 3.68g (including power cable) 3) Working voltage: 3.0~5.0V 4) Power cable approx. 90mm with Molex 1.25mm pitch ultra micro 2P plug which fits many 1s lipo batteries, JST-PH 2.0mm also available. 5) Built-in 5A/1S brushed ESC (Use of onboard ESC is optional, will support external brushless ESC) 6) You don't have to use the onboard ESC, you can direct solder an ESC into the throttle port, or reassign one of the servo output ports to the throttle function. 7) Very easy Auto binding program, Many available protocols: Spektrum DSMX DSM2, Futaba SFHSS, FRSKY-D8, FRSKY-D16, Flysky AFHDS-2A, and HOTT coming soon. 8) TELEM function: battery voltage, receiver voltage, signal strength, unit temperature 9) Servo connectors: Micro JST-SH 1.00mm pitch

Compatible servos https://www.ebay.com/itm/224392442967

Auto binding: The receiver will enter the binding mode automatically after power is applied and it doesn’t receive a transmitter signal for 15 seconds. This is indicated by the slow flashing blue LED light changing to a rapid flash. The receiver is now in the binding mode, complete the binding operation according to your transmitter’s binding instructions.

Throttle range: Throttle range calibration is automatic. You may need to lower your throttle trim all of the way down for the ESC to sense zero throttle. TELEM function: The TELEM function monitors battery voltage, receiver working voltage, signal strength, as well as working temperature in real time. NOTE: The effective control range of the TELEM function depends on the transmitter, it is quite often that the working range of the receiver is far more than TELEM function effective range.