Irrigation Fittings Kit for 1/2" Inch Tubing 24 PIECE SET - 6 Tees, 6 Couplings, 6 Elbows & 6 End Cap Figure 8 Plugs - Barbed Connectors (Rain Bird 17mm .600 ID & Compatible Drip Sprinkler Systems)


  • Fits all major brands of tubing 1/2", 17mm - Approximately .600 ID Range
  • High Impact Plastic Construction
  • 24 piece value kit - 6 Tee's - 6 Elbows, 6 Couplings, 6 Figure 8 Ends
  • Use these durable irrigation fittings to your connect 1/2" drip irrigation tubing.
  • SIMPLE TO INSTALL. Secure and easy installation without glue, tools, or clamps. Simply push the tubing firmly over the barbs for a very tight fit that won't leak. If desired you may use a heat gun or blow dryer to soften the end of the tubing before inserting.

Every drip irrigation system depends on reliable, leak-free connection fittings to keep the system together. Your 24-Piece One Stop Outdoor Irrigation Fittings Kit contains: 6 Tees - (three-way connector). 6 Couplings - (Create two way connections of poly tubing or dripline). 6 Elbows - Perfect for making exact corners or 90 degree turns. 6 - Figure Eight Line End Closures - Used to plug the end of your poly tubing. Product Specifications: For connecting emitterline and polyethylene tubing Use with 17mm emitterline and distribution tubing. One piece construction UV resistant high impact plastic Secure and easy installation without glue or clamps Operating pressure: up to 30 PSI Installation Tips: Push the tubing as far ver the barbed ends as possible. It should be a very secure fit. It should be nearly impossible (relatively speaking) to pull the tubing back off by hand. It is recommended to let the tubing heat up in the sun before installation to soften and make it more maneuverable. If your system runs at a high PSI (over 25psi) you may want to consider regulating pressure or using clamps over the fittings to be sure you will not have any blow outs or leaking issues.

WARNING! Some dust and debris created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known [to the State of California] to cause cancer and birth defects or reproductive harm. 

Some examples of these chemicals are:

  • lead from lead-based paints
  • crystalline silica from bricks and cement, as well as other masonry products
  • arsenic and chromium from chemically treated lumber

Your risk from exposure to these chemicals varies, depending on how often you do this
type of work. To reduce your exposure, work in a well-ventilated area and with approved
safety equipment, such as dust masks that are specially designed to filter out microscopic
particles.

ELECTRICAL CORDS + WIRING

WARNING! This product contains chemicals, including lead, known to the State of California
to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

FIRE PITS

WARNING! This product can expose you to chemicals including soot, which is known to the State of California to cause cancer, and carbon monoxide, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

BRASS

WARNING! This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

 

OUTDOOR GRILLS & ACCESSORIES:

COMPANY: BLAZE GRILLS

CALIFORNIA PROPOSITION 65 WARNING
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to: www.P65Warnings.ca.gov

 

BOND, STANLEY & FATMAX PRODUCTS:

WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov