Buy with confidence from a long established Australian owned and based company with our 12-month warranty and tax invoice

Hydraulic Power Pack 12V or 24V DC 2X Dbl Acting 5.0 Lt/Min Max 240 Bar
This 2 x double acting solenoid Power Pack has been designed specifically for Double Acting cylinders found on Tail Gate Loaders, Ramps on trucks and trays on low loaders, small cranes or any double acting hydraulic cylinder that is used intermittently.

It is available in both 12 Volt DC or 24 Volt DC. This is a higher quality unit than most offerings on eBay, in that the 'duty' cycle is vastly superior, DC power uses a lot of current & produces a lot of heat, therefore depending on your usage needs, cheap units will fail quickly.

This unit will produce 5 Lpm @ 3000 psi, but when your load, ie. cylinders are not under full tonnage, it will produce considerably more , meaning your cylinders move faster. 5 Lpm is the Minimum it will achieve. You can only use one circuit at a time.
We also have a higher KW which will do 9lpm at a higher price, see our store)
Available also in P & T, Single acting, or Double acting Capable of generating up to 240 Bar (3500 PSI) Pressure.
PLEASE BE ADVISE IF MOUNTING POWERPACK VERTICALLY, the oil pick-up will need to be changed out to ensure the oil pumps correctly***

This is a quality motor and pump Manufactured in Shanghai to very high standards.

Specifications
Power Rating 12 (1.6 KW) or 24 DC, 2.2 KW
Flow 5.0 litres Minute at 170 Bar (2500 PSI)
Max Pressure up to 240 BAR (3500 PSI)
Pressure relief valve Factory set at 205 BAR (3000 PSI)
Ports 9/16 UNO
7.5 Litre capacity Oil tank with combination breather/level plug and separate fill plug.
Twin Solenoids are mounted to a Steel Valve Block that has spring to centre position with all Ports Closed in centre position.
Four Heavy Duty Solenoid Coils
Amp draw up to 120 amps
Manual Actuation or Override on Solenoid Spindles.
LED Indicator Lights on Hirschman Type cable connectors to coils Flexible Mounting Positions can be mounted Horizontally or Vertically (Motor Up)
4 button Control Pendant IP 55 Rated (water and dust resistant) with 5 M cable
Safety thermistors installed in motor windings to prevent overheating. Duty Cycle = 25% at Low Duty, low load and pressure (600 PSI) = 100Amps Draw,
Allowable run time 12.5 minutes and then allowed to totally cool down. Or 150 seconds ON - 400 seconds OFF. Duty Cycle = 19% at Medium duty medium load and pressure (1600 PSI) = 160 Amps Draw
Allowable run time 7.5 minutes and then allowed to totally cool down.
or 150 seconds ON - 640 seconds OFF.
Duty Cycle = 7% 300 Amps High Duty High Load and pressure (3000 PSI) = 300 Amps Draw
Allowable run time 1.7 Minutes and then allowed to totally cool down or 150 seconds ON and 2000 seconds OFF.
Dimensions Length = 70 cm Width = 30 cm Height = 30 cm
Weight 25 KG, packed weight 30KG on skid, freight is to the nearest depot, additional charges may apply

Please click the link below for more Hydraulic Power Pack

https://www.ebay.com.au/str/hydrauliconline/HYDRAULIC-PUMPS-POWER-PACKS/_i.html?store_cat=7426401015

buying more than one item please add to cart and select combine invoice any problems or questions please feel free to contact us we will reply asap within normal business hours

.

Please be aware that extra duties and import taxes may apply to addresses outside of Australia. If there is any additional documentation that must be included for export to your location please advise when placing order. We are not accountable for paying any additional fees relating to import and it is the responsibility of the Buyer to ensure all the correct documentation is supplied

DM $ 07/11/23