New HIGH POWER® High Efficiency
12V 5A 4-pin XLR AC to DC Power Adapter
with matching 3-prong AC power cord included
New
HIGH POWER® High Efficiency
HIGH POWER® High Efficiency
Universal AC to 12V DC 5A 4-pin XLR Power Supply
with matching UL Safe 3-prong AC power cord included
- Input: 100-240 VAC +/- 10% full range
- Input AC Inlet: IEC 320 3pin (Type C14) compatible with standard 3-prong grounded power cord (included).
- Output Voltage: 12V DC
- Ratings: 5A (60W)
- CEC Efficiency Level: IV
- Standby idle no load power consumption is less than 0.5 Watt
- High efficiency switching technology with 83% efficiency
- DC Cable length - 47.5" (120cm)
- High efficiency switching technology with 83% efficency at full load
- Fanless AC adapter operates in total silence. Ideal power source for devices such as DVR, LCD monitor, etc.
- WorldwideEMI &SAFETY APPROVAL: UL/cUL , TUV/GS, CE, FCC, CCC, BSMI, DOIR +C-TICK, GOST-R, PSE, PSB, EK
RoHS Compliant - made with hazardous-free components
RoHSis the Restriction Of the use of certain Hazardous Substances inelectrical and electronic equipment. This has been a standard in Europeand is now becoming a standard in the world. Not only lead, but cadium,mercury, hexavalent chromium, polybrominated biphenyl (PBB), andpolybrominated diphenyl ether (PBDE) flame retardants are limited as well
Built-in power status indicator
Green LED turns steady on when there is a reliable 12V DC output.
LED flashes when there is a problem found by the internal detection circuitry.
LED turns off when there is no power output or no power input.
RoHSis the Restriction Of the use of certain Hazardous Substances inelectrical and electronic equipment. This has been a standard in Europeand is now becoming a standard in the world. Not only lead, but cadium,mercury, hexavalent chromium, polybrominated biphenyl (PBB), andpolybrominated diphenyl ether (PBDE) flame retardants are limited as well
Lead-FREE
Cadium-FREE
Mercury-FREE
Hexavalent chromium-FREE
PBB-FREE
PBDE flame retardants-FREE
Built-in power status indicator
Green LED turns steady on when there is a reliable 12V DC output.
LED flashes when there is a problem found by the internal detection circuitry.
LED turns off when there is no power output or no power input.
Technical Specifications:
Universal input 100-240 VAC
High efficiency switching technology -- 83% typical @ full load
CEC Efficiency Level: IV
Single 12V output @ 5A +- 5%
Load Regulation: +- 5% (11.4V - 12.6V)
DC Cable length - 47.5" (120cm) with UL rated 1185 AWG#18 cable
Over Current protection
Over Voltage protection
Short circuit protection
Open-Circuit Protection
100% HI-POT tested
100% cycling BURN-IN
Dimensions: 120 mm (L) * 60 mm (W) * 35mm (H)
Storage Environment:
Temperature: -20 - 85 degree C
Humidity: 5 - 90 %
Altitude: From sea level to 40,000Ft
Operating Environment:
Temperature: 0 - 40 degree C
Humidity: 10 - 90 %
Altitude: From sea level to 10,000Ft
MTBF : > 30,000 hours at 80% load and 40 degree C ambient conditions
Input Fuse Rating: T3.15A/250V
Inrush Current at cold start, maximum load:
30A at 110 VAC
60A at 220 VAC
Line Regulation: This line regulation is less than ± 1%, @ full load .
Turn-ON Time: The output voltage should rise to 90% of +12V in less than 3 seconds from AC apply to 110VAC
No load power consumption is less than 0.5 Watt @ 230VAC/ 50Hz
DC Output Ripple/Noise: 2% max
Hi-Pot Tested: 4242 VDC at 5mA for 3 second between primary and secondary circuit
Insulation Tested: 500VDC for 3 seconds between primary and secondary circuit
Worldwide EMI & SAFETY APPROVAL: UL/cUL , TUV/GS, CE, FCC, CCC, BSMI, DOIR +C-TICK, GOST-R, PSE, PSB, EK
Universal input 100-240 VAC
High efficiency switching technology -- 83% typical @ full load
CEC Efficiency Level: IV
Single 12V output @ 5A +- 5%
Load Regulation: +- 5% (11.4V - 12.6V)
DC Cable length - 47.5" (120cm) with UL rated 1185 AWG#18 cable
Over Current protection
Over Voltage protection
Short circuit protection
Open-Circuit Protection
100% HI-POT tested
100% cycling BURN-IN
Dimensions: 120 mm (L) * 60 mm (W) * 35mm (H)
Storage Environment:
Temperature: -20 - 85 degree C
Humidity: 5 - 90 %
Altitude: From sea level to 40,000Ft
Operating Environment:
Temperature: 0 - 40 degree C
Humidity: 10 - 90 %
Altitude: From sea level to 10,000Ft
MTBF : > 30,000 hours at 80% load and 40 degree C ambient conditions
Input Fuse Rating: T3.15A/250V
Inrush Current at cold start, maximum load:
30A at 110 VAC
60A at 220 VAC
Line Regulation: This line regulation is less than ± 1%, @ full load .
Turn-ON Time: The output voltage should rise to 90% of +12V in less than 3 seconds from AC apply to 110VAC
No load power consumption is less than 0.5 Watt @ 230VAC/ 50Hz
DC Output Ripple/Noise: 2% max
Hi-Pot Tested: 4242 VDC at 5mA for 3 second between primary and secondary circuit
Insulation Tested: 500VDC for 3 seconds between primary and secondary circuit
Worldwide EMI & SAFETY APPROVAL: UL/cUL , TUV/GS, CE, FCC, CCC, BSMI, DOIR +C-TICK, GOST-R, PSE, PSB, EK