PLEASE
SEE ALL PHOTOS
AS THEY ARE PART OF THE DESCRIPTION! What you see in the photo
is what you will be getting. Please be sure to read all descriptions
on label.
INTERNATIONAL
BUYERS!!!
THESE
WILL NOT BE SHIPPED INTERNATIONALLY.WILL NOT SHIP TO Hawaii,
Alaska, Puerto Rico, NO SHIPPING TO P.O.BOX
ADDRESS.
If
one of these states does make a purchase such as : Hawaii, Alaska,
Puerto Rico, Rhode Island, APO, FPO May incur extra charges.
Please message us if you are purchasing this item as the costs can be
more expensive.
I
charge a 20% restocking fee for items returned due to customer error
or non-warranty related returns. Shipping will not be refunded unless
the item was received DOA or item was not as described.
UCT1102 (16U477) This item has been restricted from sale in the following states: California
Capacitor-start/run pool and spa pump AC motors have a main winding and an auxiliary winding with both a start capacitor and a run capacitor for additional power during startup for higher torque and higher operating efficiency.
- ItemPool Pump Motor
- Motor ApplicationPump
- Motor Sub ApplicationPool and Spa Pump
- PhaseSingle
- Motor DesignCapacitor-Start/Run
- HP1
- Nameplate RPM3,450
- No. of Speeds1
- Voltage115/230V AC
- Full Load Amps11.0/5.5
- Frame56J
- Usable @ 208VNo
- Usable @ 200VNo
- Hz60
- Motor Service Factor1
- Motor Thermal ProtectionAuto
- Ins. ClassB
- Max. Ambient Temp.50 Degrees C
- Duty CycleContinuous
- Motor Shaft RotationCCWSE
- Motor Enclosure DesignOpen Dripproof
- Motor Mounting TypeFace
- Motor Mounting PositionHorizontal
- Motor Frame MaterialSteel
- FinishBlack
- Shaft Dia.5/8 in
- Shaft Length2 9/16 in
- Shaft MaterialStainless Steel
- Motor Shaft DesignThreaded
- Conduit Box PositionF3
- Bolt Circle Dia.5 15/16 in
- Motor BearingsBall
- Height5 5/8 in
- Overall Length14 1/4 in
- Length Less Shaft11 11/16 in
- Body Dia.5.7 in
- Weight25 lb
- Motor Efficiency GroupEnergy Efficient
- StandardsCSA, UL
SK1072 (5PE43) This item has been restricted from sale in the following states: Arizona, California, and Florida
Capacitor-start pool and spa pump AC motors use a capacitor to provide additional power during startup for higher starting torque. This higher torque allows these single-phase motors to move heavier loads at lower speeds, allowing them to be more efficient than split-phase motors.
- ItemPool Pump Motor
- Motor ApplicationPump
- Motor Sub ApplicationPool and Spa Pump
- PhaseSingle
- Motor DesignCapacitor-Start
- HP3/4
- Nameplate RPM3,450
- No. of Speeds1
- Voltage115/230V AC
- Full Load Amps14.6/7.3
- Frame56C
- Usable @ 208VNo
- Usable @ 200VNo
- Hz60
- Motor Service Factor1.5
- Motor Thermal ProtectionAuto
- Ins. ClassB
- Max. Ambient Temp.50 Degrees C
- Duty CycleContinuous
- Motor Shaft RotationCCWSE
- Motor Enclosure DesignOpen Dripproof
- Motor Mounting TypeFace
- Motor Mounting PositionHorizontal
- Motor Frame MaterialSteel
- FinishBlack
- Shaft Dia.5/8 in
- Shaft Length2 1/16 in
- Shaft MaterialStainless Steel
- Motor Shaft DesignKeyed
- Bolt Circle Dia.5 13/16 in
- Motor BearingsBall
- Height5 9/16 in
- Overall Length13 5/8 in
- Length Less Shaft11 9/16 in
- Body Dia.5.7 in
- Weight22 lb
- Motor Efficiency GroupStandard Efficient
- StandardsCSA, UL
CENTURY FC1066AF
- ItemCondenser Fan Motor
- Motor ApplicationHVAC/R
- Motor Sub ApplicationCondenser Fan
- PhaseSingle
- Motor DesignPermanent Split Capacitor
- HP5/8
- Nameplate RPM1,075
- No. of Speeds1
- Voltage200-230/460V AC
- Full Load Amps4.0/2.0
- Frame48Y
- Output Watts450 W
- Hz60
- Usable @ 208VYes
- Usable @ 200VYes
- Motor Service Factor1
- Motor Thermal ProtectionAuto
- Ins. ClassF
- Duty CycleContinuous
- Max. Ambient Temp.70 Degrees C
- Motor Shaft RotationCW/CCW
- Motor Enclosure DesignOpen Air-Over
- Motor Mounting TypeBand/Stud
- Motor Frame MaterialSteel
- Motor Mounting PositionVertical Shaft Up
- Shaft Length3 5/8 in
- Lead Length5 in
- Shaft Dia.1/2 in
- Removable BaseYes
- Conduit Box LocationExterior
- Conduit Box PositionF1
- Motor BearingsBall
- Body Dia.5 5/8 in
- Motor Shaft DesignKeyed
- Overall Length12 15/16 in
- Length Less Shaft9 5/16 in
- FeaturesBelly Band, Thermally Protected, Vertical Shaft Up
- Weight19 lb
- Motor Efficiency GroupStandard Efficient
- StandardsCSA Certified, UL Recognized
- Capacitor Required2MDY7
Room Air Conditioner Motor, 1/15, 1/20, 1/30, 1/50 HP, Shaded Pole, Nameplate RPM 1,050 389A 4UU37
Technical Specs
- ItemRoom Air Conditioner Motor
- Motor ApplicationHVAC/R
- Motor Sub ApplicationRoom Air Conditioner
- PhaseSingle
- Motor DesignShaded Pole
- HP1/15, 1/20, 1/30, 1/50
- Nameplate RPM1,050
- No. of Speeds4
- Voltage115V AC
- Full Load Amps2.4, 1.60, 1.10, 0.80
- Frame42Y
- Usable @ 208VNo
- Usable @ 200VNo
- Motor Thermal ProtectionAuto
- Hz50 Hz
- Motor Service Factor1
- Ins. ClassA
- Motor Shaft RotationCCWLE
- Max. Ambient Temp.40 Degrees C
- Lead Length54 in
- Motor Enclosure DesignOpen Air-Over
- Motor Mounting TypeStud
- Motor Mounting PositionHorizontal
- Number of Shafts2
- Motor Frame MaterialSteel
- Shaft Dia.1/2 in
- Shaft Length10 1/2 in
- Motor BearingsSleeve
- Motor Shaft DesignFlat
- Overall Length25 in
- Length Less Shaft4 in
- Mounting Holes(4) #8-32
- Body Dia.5 in
- Stud Quantity4
- Weight9 lb
- Mounting Stud Pattern2-5/16 in x 4 in
- Bolt Circle Dia.4 5/8 in
- Stud Size#8-32
- Ring to Ring Center4 to 5 in
- Resilient Ring Dia.2 1/4 in
- StandardsCSA, UL
- Capacitor RequiredNo