Here at MadMopeds we don't just sell spares. We use these on our own bikes plus our customers machines so we know that we can sell all our parts with confidence!

This will fit your classic Honda 400 /4 or CB400F2 supersport or Honda 400 Automatic BUT YOU MUST CHECK YOUR TANK STUB SIZE BEFORE YOU BUY THIS PLEASE.

Please check that you have a 16mm thread on your tank stub. The alternative is 20mm and you should be able to hold a rule across it and get a good idea.

This tap suits the 16mm UK version F2!

We also stock 20mm taps too.

This is a brand new reproduced fuel tap and it has the following settings... ON, OFF, RESERVE.

We are a genuine UK seller with UK stock!

Check out our fantastic feedback too.

We can get this to you usually within 3 or 4 days but if you need it quickly select the 1st class option for only £2 extra

Here at MadMopeds we don't just sell spares. We use these on our own bikes plus our customers machines so we know that we can sell all our parts with confidence!

This will fit your Honda CB400F 400 four

Replaces Honda OEM Parts No:

16950-147-045

16950-149-025

16950-163-035

16950-gw8-670

16950-147-025

16950-147-035

16950-149-000

16950-149-005

16950-149-015

Note that our tap has the fuel outlet on the right and a fuel strainer bowl on the bottom. The bowl is made from metal and not plastic like some others are.

The casting of our taps is superb and they are all checked for smooth operation before dispatch.

Please take a good look at the pictures of my taps and see if you can find better castings elsewhere!

Don't mess about trying to reseal your old original fuel tap. I've tried all that and it just doesn't last. They generally leak through the front. Also the seal kits are expensive too.

Apart from that it's not worth wasting time even trying to fix them when you can buy something like this from us!

OK so this tap not original Honda but it is a much cheaper alternative than trying to get an original one.

Our taps are as good as you are going to buy, and better than the originals because the front plate is screwed and so this tap can be serviced!

I've searched high and low for a long time for taps for these bikes that are just right and these are the best!

We check each tap before dispatch for any casting errors and tightness of the tap.

To date,  we have had no returns or issues with my supplier and manufacturer.

Fitting this will eradicate all the usual problems of old taps not working and fuel not flowing or leaking taps.

Technical specifications:

These taps are very well made with very good casting material and tolerances, they are not made from 'monkey metal' like lots of other cheap taps are. I've bought them!... and binned them!

Also they are not within the nearest 1cm etc that you may find non UK suppliers quoting!

This will be a direct fit on your bike.

Connection to fuel line: 6mm internal diameter fuel pipe.

Main thread size is 16mm x 1.5mm clockwise thread.

PLEASE CHECK YOURS BEFORE PURCHASE

We sell good quality E5 and E10 resistant green tinted or clear 6mm fuel pipe too if you need it.

Our taps are supplied with a seal and have an internal syphon pipe which is also a filter. I wouldn't recommend removing this tap once it's fitted and sealed so I would recommend that you fit an inline filter too. Triple cover!

Please compare yours with my pictures before purchase.

Dispatched with 2nd Class parcel postage or 1st class for only £2 extra