We are a genuine UK seller with UK stock!

Check out our fantastic feedback on these taps!

We can get this to you usually within 3 or 4 days, maybe faster if you require 1st class at only £2 extra

Here at MadMopeds we don't just sell spares. We use these on our own bikes plus our customers machines so we know that we can sell all our parts with confidence!

We love classic bikes and we know that this will fit your classic early Suzuki 2 stroke.

This tap has 2 petrol fuel outlets and a bottom filter as well as tube filters.

It doesn't have a vacuum feed and so if you currently have the original vacuum type fitted this can be used to replace that and your vacuum tube will require plugging.

This is a brand new reproduced fuel tap and it has the following settings... ON, OFF, RESERVE.

Note that this tap has the internal screen filter and metal filter bowl on the bottom and not a dummy bowl that does not unscrew like some others are selling 🙄 See my pictures

The casting of our taps is superb and they are all checked for smooth operation before dispatch.

Please take a good look at the pictures and see if you can find better castings elsewhere!

Don't mess about trying to reseal your old original vacuum operated fuel tap. We've tried all that and it just doesn't last. They generally leak through the front or don't flow petrol, or just flow continuously. Also the seal kits are expensive too and as much as this new tap.

Apart from that it's not worth wasting time even trying to fix them when you can buy something like this from us!

OK so this tap not original Suzuki but it is a much cheaper alternative than trying to get an original one which are over £300 now 😁

Our taps are as good as you are going to buy, I've searched high and low for a long time for taps for these bikes plus other classic bikes and blue smokers that are just right and these are the best!

We check each tap before dispatch for any casting errors and tightness of the tap.

To date, we have had no returns or issues with my supplier and manufacturer.

Fitting this will eradicate all the usual problems of old taps not working and fuel not flowing or leaking taps.

Technical specifications:

These taps are very well made with very good casting material and tolerances, they are not made from 'monkey metal' like lots of other cheap taps are. I've bought them!... and binned them!

Also they are not within the nearest 1cm etc that you may find non UK suppliers quoting!

This will be a direct fit on your bike.

Thread size M22 or 22mm thread.

Connection to fuel line suits tight 6mm or 7mm internal diameter fuel pipe.

Note that we sell very good quality clear or green tinted E5 and E10 resistant heavy wall thickness petrol pipe separately if required.

Taps are obviously supplied with a tank seal too.

Our taps do have a filter bowl on the bottom but the internal syphon pipes also have a filter.

We wouldn't recommend removing this tap once it's fitted and sealed so I would recommend that you fit an inline filter too. Triple cover!

Please compare yours with my pictures before purchase.

Dispatched with 2nd Class parcel postage.

1st class is £2 extra. Please could you make your selection on purchase.

MadMopeds