This non vacuum type tap will fit the following bikes...

Yamaha FZ400 1997

Yamaha TDM850 1999-2001 WITH ONE FUEL OUTLET - 1998 99 CHECK YOURS AS SOME HAVE 2 REAR FUEL OUTLETS

Yamaha FZS600 Fazer 1998-2001

Yamaha FZS600S Fazer 1998-2001

Yamaha FZS 1000 S Fazer , RN06 , 2003

Yamaha FZS 1000 S Fazer , RN14 , Year 2004

Yamaha BT1100 Bulldog 2002-2006

Yamaha XJ900 XJ900S Diversion 1995-2002

Replacing vacuum tap (message us if your existing tap has 44 or 46mm mounting hole centres)

Yamaha YZF R1 YZF-R1 1998-2001

Yamaha YZF R1 YZF-R1 Champions Limited Edition 2001

Yamaha YZF1000 YZF1000R Thunderace 1996-2001

We are a genuine UK seller with UK stock!

Check out our fantastic feedback on these taps as we know that you won't find better anywhere else 😁

Here at MadMopeds we don't just sell spares. We use these on our own bikes plus our customers machines so we know that we can sell all our parts with confidence!

This is a brand new reproduced fuel tap and it has the following settings... ON and OFF and has NO RESERVE setting

Note that our tap has the fuel outlet on the right

The casting of our taps is superb and they are all checked for smooth operation before dispatch.

Please take a good look at the pictures of our taps and see if you can find better castings elsewhere!

Don't mess about trying to reseal your old original fuel tap. We've tried all that and it just doesn't last. They generally leak through the front or just get blocked and bunged up. Also the seal kits are expensive too if you can even find them.

Apart from that it's not worth wasting time even trying to fix them when you can buy something like this from us so cheaply !

OK so this tap not original Yamaha but it is a much cheaper alternative than trying to get an original one.

Our  taps are as good as you are going to buy, the quality equals the factory item.

We've searched high and low for a long time for taps for these bikes that are just right and these are the best!

We check each tap before dispatch for any casting errors and tightness of the tap.

To date, we have had no returns or issues with my supplier and manufacturer.

Fitting this will eradicate all the usual problems of old taps not working and fuel not flowing or leaking taps.

Technical specifications:

These taps are very well made with very good casting material and tolerances, they are not made from 'monkey metal' like lots of other cheap taps are. I've bought them!... and binned them!

Hole diameter is 6.5mm for your 6mm bolts

Connection to fuel line: 8 mm internal diameter pipe.

(we can also supply E5 and E10 resistant heavy wall thickness petrol pipe and stainless steel clips to suit this tap)

Taps are obviously supplied with a new tank seal too.

(We also sell spare tank seals for if you need to wash your tank out or repaint your tank)

We would also recommend that you fit an inline filter.

Please compare yours with my pictures before purchase. Some old taps have a rear outlet.

These taps are a direct replacement for all types.

Dispatched with 2nd Class parcel postage but if you need it quickly please select the 1st class postage option and pay the extra £2

MadMopeds UK