10x PIPE INSULATION 90° BEND, DIAMETER 28MM WITH AN INSULATION OF 13MM

Insulate corners without annoying cutting!
We deliver the finished 90° bend.
Just snap on the insulation
pull off the tape,
squeeze and done!

Save money and insulate your hot water pipes.

CLIMAFLEX® naturefoam easy ensures quick and clean processing thanks to its proven locking system.
Equipped with a cutting edge that is self-adhesive on both sides, the insulation of laid pipes is twice as fast as with conventional products.
At the same time, CLIMAFLEX® naturefoam easy offers all the advantages of closed-cell insulating foams for heating and sanitary applications.
A high level of technical functionality and a positive ecological balance are the hallmarks of this product line.

Thermal conductivity (EN ISO 8497):
0.036W/mK at 0°C
0.040 W/mK at 40 °C
0.043 W/mK at 60 °C
0.045 W/mK at 70 °C

Fire behavior (EN 13501-1):
BLs1d0

Temperature range (EN 14707):
from 0 °C to +100 °C

Flexible round extruded and closed-pore polyethylene foam, resistant to aging and difficult to decompose.

The insulation does not contain any PVC components.

For copper pipe, steel pipe, multi-layer pipe and PPR pipe

We recommend:
Due to press tolerances and small overhangs, systems such as those from Viega, Sudo, Mapress, C-Press and others may require larger diameters. Please measure the thickest point on the bracket. As a rule, the insulation is bought one size larger. For example: you have pipes with a diameter of 28mm, then choose a elbow with a diameter of 35mm for the bends

Please do not complete your purchase until you have bought all the parts for the insulation from us. We only charge shipping once and you save money. If, due to the system, we charge you twice for shipping, we will of course reimburse you for the overpaid fees.

Equipped with a cutting edge that is self-adhesive on both sides, the insulation of laid pipes is twice as fast as with conventional products. At the same time, CLIMAFLEX® naturefoam easy offers all the advantages of closed-cell insulating foams for heating and sanitary applications. Due to press tolerances and small overhangs, systems such as those from Viega, Sudo, Mapress, C-Press and others may require larger diameters. Please measure the thickest point on the bracket. As a rule, the insulation is bought one size larger. For example: you have pipes with a diameter of 28mm, then choose a elbow with a diameter of 35mm for the bends Please do not complete your purchase until you have bought all the parts for the insulation from us. We only charge shipping once and you save money. If, du