We are a genuine UK seller with UK stock and can usually get this to you usually within 4 days but select the 1st class postage option if needed quickly please

Here at MadMopeds we don't just sell spares. We use these on our own bikes plus our customers machines so we know that we can sell all our parts with confidence!

We love classic bikes and we know that this will fit your classic early Suzuki 2 stroke.

This tap has 2 petrol fuel outlets and a bottom filter inside as well as tube filters.

It doesn't have a vacuum feed and so if you currently have the vacuum type fitted this can be used to replace that and your vacuum tube will require plugging.

This is a brand new reproduced fuel tap and it has the following settings... ON, OFF, RESERVE.

Note that our tap has the internal screen filter and metal filter bowl on the bottom

The casting of our taps is superb and they are all checked for smooth operation before dispatch.

Please take a good look at the pictures of our taps and see if you can find better castings elsewhere!

Don't mess about trying to reseal your old original fuel tap. We've tried all that and it just doesn't last. They generally leak through the front or don't flow petrol. Also the seal kits are expensive too and as much as this new tap.

Apart from that it's not worth wasting time even trying to fix them when you can buy something like this from us!

OK so this tap not original Suzuki but it is a much cheaper alternative than trying to get an original one.

These taps are as good as you are going to buy, I've searched high and low for a long time for taps for these bikes plus other classic bikes and blue smokers that are just right and these are the best!

We check each tap before dispatch for any casting errors and tightness of the tap.

To date, we have had no returns or issues with my supplier and manufacturer.

Fitting this will eradicate all the usual problems of old taps not working and fuel not flowing or leaking taps.

Technical specifications:

These taps are very well made with very good casting material and tolerances, they are not made from 'monkey metal' like lots of other cheap taps are. I've bought them!... and binned them!

Thread size M22 or 22mm thread.

Connection to fuel line suits tight 6mm or 7mm internal fuel pipe.

Note that we sell very good quality 6mm or 7mm thick wall E5 and E10 petrol pipe separately if required.

Taps are obviously supplied with a tank seal too.

Our taps do have a filter bowl on the bottom but the internal syphon pipes also have a filter.

We recommend that you fit inline filters too. 

Please compare yours with our pictures before purchase.

Dispatched with 2nd Class parcel postage.

1st class is only £2 extra but much faster. Please could you make your selection on purchase.

MadMopeds