RCA to RCA Phono Cable Mogami 2965 High Definition Audio OFC Lead, Stereo Pair Hi Fi Interconnect with High Quality Amphenol ACPR Die-Cast, Gold Plated Connectors.

AUDIOPHILE GRADE Lead using quality audio materials and components.

Professionally handmade quality audio leads.

Each cable is handmade and finished to a high standard using Oyaide SS- 47 Audio Grade Silver Solder for a complete professional finish. Each cable is then mechanically and electronically tested before dispatch.

Various cable lengths available from above drop down menus.

Connectors:

Amphenol ACPR RCA Phono plugs with smooth Satin body are high-end, professional-grade RCA connectors. Gold plated brass contacts enhance conductivity. Insulation prevents any shorting inside. Coloured rubber grommet for long lasting strain relief.

Soldered Terminations:

Oyaide SS-47 Audio Grade Silver Solder

The SS-47, the Oyaide original hi-fidelity solder, is produced in order to maximize the capacity of cables and connectors by eliminating its sound character.

After the careful consideration of the importance of the contact and joining area, Oyaide finally achieved to produce the high-fidelity audio specialized solder

They have tried to improve the quality by always selecting best material . There is no exception about this audio grade solder, SS-47. Compared to general solders which usually contain 3N (99.9%) pure tin, SS-47 contains 4N (99.993%) pure tin achieved by excluding impurities to the maximum

Furthermore, 4.7% silver and 1.7% copper are contained for the purpose of improvement of electric conductivity and durability.

Cable:

Mogami 2965 - High Definition 75ohm Dual Coaxial Audio Video Cable

The Mogami 2965 is a high performance, super flexible, 75ohm dual sub miniature coaxial cable. 
It has OFC (Oxygen-Free Copper) conductors for the highest level of transparency, low capacitance value of 57pF/m (17.4pF/ft) for accurate response and ultra high density spiral shield for lowest noise floor.

Recommended for Audiophile applications, High Performance stereo unbalanced audio interconnects, It can be used for Digital or Analog Video and for Digital or Analog Audio.

Specification

  • Mogami Part Number:  2965
  • No. of Conductor: 2x1 (dual)
  • Conductor: Details: 20/0.12 OFC, Size: 0.226 mm² (#24 AWG)
  • Insulation: Overall Diameter (mm): 2.65φ (0.104"), Material: XLCPE (Cross-Linked Cellular PE), Colors: Clear
  • Served Shield: Approx.66/0.12 OFC
  • Jacket: Overall Diameter (mm): 4.8φ (0.189"), Material: Flexible PVC, Colors: Black
  • Electrical & Mechanical Characteristics (DC Resistance at 20°C (68°F):  Inner Conductor: 0.083 Ω/m (0.0025 Ω/ft), Shield: 0.025 Ω/m (0.0076 Ω/ft)
  • Capacitance at 1 kHz, 20°C (68°F): 57 pF/m (17.4 pF/ft)
  • Inductance between conductors at 1kHz. 20°C 68°F): 0.4μH/m (0.12μH/ft)
  • Characteristic Impedance(10MHz): 75ohm
  • Attenuation(10MHz): I0.047dB/m (0.014db/ft)
  • Phase Constant(10MHz): 0.3 rad/m
  • Electrostatic Noise: 50m V Max.
  • Microphonics at 50KΩ Load: 40m V Max.
  • Voltage Breakdown: Must withstand at DC 500V/15sec.
  • Insulation Resistance: 105 MΩ・m Min. at DC 125V, 20°C
  • Flex Life: 16,500cycles
  • Tensile Strength: 539N
  • Emigration: non–emigrant to ABS resin
  • Applicable Temperature: -20°C~ +70°C(-4°F~ +158°F)