CX series combustion machine features:
1, good fuel atomization, less energy consumption, low noise
The combustion machine adopts the centrifugal nozzle spray fuel, when the injection pressure is greater than or equal to 0.6 MPA, all can obtain satisfactory atomization effect, because it does not need to atomization medium, so less energy consumption, low noise
2, oil and gas well with, flame stability, high efficiency, little pollution to the environment.
Combustion engine using vortex and dc air distribution at the same time, the fuel and combustion air mixing, obtain satisfactory fuel concentration field, at the same time cause high temperature cyclone backflow, greatly improve the stability of flame, trapped and combustion safety, the CO2 content in flue gas can be up to 10-13%, their level of smoked less than Mr Clarke (Bacharach) level 2, small pollution to the environment, comply with the regulation of the world's most stringent air.
3, safe and reliable, full automatic control
Adopt international advanced flame monitoring and combustion safety controller, according to the requirements of the use safety, the implementation for the wind, ignition and fuel injection, combustion, shutdown, restart, etc. Automatic program control, fully meet the boiler, furnace, drying oven, oven, such as kiln process requirement, when either the program a failure occurs, which can automatically stop.
4, each burning machine are equipped with sliding flange, suit on burning the blast pipe at the back of the head, just put the flange fixed to the stove, and appropriate to adjust its position in the blast pipe, namely to the accurate position of the burner in the chamber of a stove or furnace, connect the power supply, control circuit and the oil, can be put into operation.
5, convenient maintenance
Design has considered the needs of the routine inspection, for vulnerable parts can be easily disassembled parts, cleaning, repair and replacement.The combustion machine can be widely used in steam, hot water, household boiler, hot air generator, baking equipment, melting furnace, heating furnace, cremation furnace, burning combustion furnace and other industrial kiln.
Combustion models, specifications of the said method
1, model
CX said integrated automatic diesel combustion machine models
2, fuel injection quantity
Says the biggest spray combustion engine oil may recommend the use of fuel injection quantity.The maximum number of injection such as 40 said burning machine is 40 kg/h.
3, operation control mode
Seller single-stage control (or a fire) this burning machine is only one nozzle, or safety of, or under a constant amount of fuel to run with Y said.
Denominated in the two-stage control (or 2) fire the combustion machine equipped with a pair of nozzles, the male can at least (a pair of nozzle work) or maximum) (pair of nozzles working at the same time the fuel flow movement, represented by R
4, fuel type
The type diesel combustion machine (20 degrees of viscosity of 1. 5) expressed in D
5, installation form expressed in F of flange installation is adopted, the hinge is installed with H said.
6, the spray Angle
In July and nozzle atomizing Angle of 45 degrees, with 45 said.60 degrees, with 60, said general single-stage control (a fire) is 60 degrees, (2) the double period is 65 degrees, or according to customer's different needs.
