CN
15x18 (18mm Core Depth) 4 Rails Painted
The condenser is a heat exchanger. Its
similar in design with the evaporator, the heater core and the radiator. The
condenser is mounted directly in front of the radiator where it can receive the
full air flow created by vehicle forward motion and by the engine fan. The
condenser receives the heated, pressurized refrigerant vapor from the
compressor's discharge hose. The refrigerant vapor enters at the top of the
condenser and flows through the coils, conducting heat through the walls of the
tubing and into the cooling fins, the radiating off the fins into the cooler
atmosphere.
U.P.C: Does Not Apply
Manufacturer |
GLOBAL AIR |
·
FROM USERS FEEDBACK
CONDENSER CAN BE USED EITHER SIDE, EVEN VERTICAL OR FLAT. GREAT FOR PROJECT
CARS, NON-AUTOMOTIVE APPLICATIONS, RESTORATION, HOT RODS AND MORE.
·
SIZE: 15 inches X
18 inches X 0.709" (18 mm) 100% JIG FITTED AND LEAK TESTED.
·
PARALLEL FLOW - ALUMINUM
FIN. O-RING #6 AND #8