We are a genuine UK seller with UK stock!

Check out our 100 percent feedback too. We are fuel tap specialists.

We can get this to you usually within 3 or 4 days as we post daily

Here at MadMopeds we don't just sell spares. We use these on our own bikes plus our customers machines so we know that we can sell all our parts with confidence!

This will fit your classic two stroke Yamaha DT125 or DT175 From 1978 to 1982

See our other listing if you have a newer bike with the bolt on tap rather than the screw on like this one.

This is a brand new reproduced fuel tap and it has the following settings... ON, OFF, RESERVE.

Note that my tap has the fuel outlet on the right and the filter bowl on the BOTTOM as does the original.

The casting of my taps is superb and they are all checked for smooth operation before dispatch.

Please take a good look at the pictures of my taps and see if you can find better castings elsewhere! Note also that the filter bowl on these taps is made from metal and NOT plastic like some others!

Don't mess about trying to reseal your old original fuel tap. I've tried all that and it just doesn't last. They generally leak through the front or get so bunged up with crystallised petrol inside that they stop working altogether.

OK so this tap not original Yamaha but it is a much cheaper alternative than trying to get an original one.

My taps are as good as you are going to buy, I've searched high and low for a long time for taps for these bikes plus other classic blue smokers that are just right and these are the best!

I personally check each tap before dispatch for any casting errors and tightness of the tap.

To date, I have had no returns or issues with my supplier and manufacturer.

Fitting this will eradicate all the usual problems of old taps not working and fuel not flowing or leaking taps.

Technical specifications:

These taps are very well made with very good casting material and tolerances, they are not made from 'monkey metal' like lots of other cheap taps are. I've bought them!... and binned them!

This will be a direct fit on your bike.

Connection to fuel line: 6mm pipe.

Taps are obviously supplied with a seal too.

We also sell very good quality heavy wall clear Petrol pipe to suit this tap. Check out our other listings.

Our taps do have a filter bowl on the bottom but we would recommend that you also fit an inline filter too.

Please compare yours with my pictures before purchase.

Dispatched with free 2nd Class parcel postage unless you require faster 1st class delivery for an extra £2.

Please could you make your selection on purchase.

MadMopeds