Starwars Lightsaber Xeno3 Xenopixel or RGB v115 Jedi Sith Cosplay 5 colours
The Lightsword –
commonly called the saber, known for its glowing blade – is the iconic weapon
of great warriors. A wide range of saber toys has been distributed worldwide
since the 1970s. Domms Lightsabers sells high-quality, combat-ready sabers that
can be used for display, training, or playing our epic battles and dueling. Our
goal is simple – to make fans’ dreams a reality everywhere.
Our innovative
products come with market-leading features, and we are sure you will enjoy the
range available. Below is more detailed information about the saber we have
listed. As well as some valuable tips and advice.
The fight for the
fate of the galaxy awaits you. Will you fight for freedom or domination? Jedi
or Sith? You decide. May the force be with you.
Immerse yourself in the Star Wars
universe with our high-quality, combat-ready Luke Skywalker Return of the Jedi
Lightsaber, featuring advanced Xenopixel technology. Domms Sabers brings the
iconic weapon of legendary warriors to life, offering a perfect blend of form
and function. Our sabers are ideal for display, training, or engaging in epic
battles and duels, fulfilling the dreams of fans across the globe.
Embody the spirit of a true Jedi Knight with this stunning replica, showcasing
a glowing blade, authentic design, and cutting-edge Xenopixel technology for an
unparalleled experience. The power to shape the galaxy's future is in your
hands. Will you fight for freedom or seek domination? Jedi or Sith? The choice
is yours. May the Force be with you!
RGB Eco Smoothswing version
The light is an LED
12w RGB (red, green, and blue) which means you get to choose the colour you
want, whenever you want, as the blade cycles through.
It comes with a safety-protected
3000mAh battery, battery backward protected system, overload system and over-discharge
system.
The speaker is 2-3
watts, 4/8 ohm, which gives a fantastic quality.
Features include pre-power
on, Blaster, Lockup, Flash on Clash, a selection of sound fonts, Volume
adjustment, Light effective adjustment, and smooth swing.
All RGB sabers
include 16 sets of sound fonts.
The blade size is
92cm long, 2mm thick, and 1" OD removable bullet tip.
RGB Eco Smoothswing Instructions
Press and hold the
LED button to bring you out of sleep mode. You will hear a “power on” voice,
and the LED button will turn on.
Press and hold the
button once, quickly, to turn the blade on.
The following
controls activate when the blade is on and are based on the flash of the LED
button light:
1) A quick press will
initiate a single blaster deflect effect.
2) Press and hold the
button for one flash, then release. This will initiate the lockup effect. A
quick press will end the lockup effect.
3) Press and hold the
button for two flashes, then release. This will initiate the colour cycle. A
quick press will end the process when the colour you want shows.
4) Press and hold the
button for three flashes to enter the quick colour selection. When a colour you
like appears, press the button once to exit.
5) Press and hold past
three flashes to shut off the blade.
While the blade is
off, the following controls are activated based on the flash of the LED button light:
1) Press and hold the
button for one flash, then release. This will change the volume. There are three
settings: Volume high, Volume low and mute.
2) Press and hold the
button for two flashes, then release. This will change the blade effect. There
are three blade effects: Steady, Pulse and Unstable
3) Press and hold the
button for three flashes, then release. This will change the sound font to the following
selection.
4) Press and continue to
hold past the third flash for approximately 10 seconds to put the saber back
into sleep mode.
You mustn’t let the
battery fully discharge, so our advice is to fully charge the saber when it
says low battery or if you haven’t used it in a while.
Xenopixel Version
Xeno3.0 Core
Features:
·
* Mobile app control via Bluetooth
·
* Bluetooth firmware upgradable via app or via
SD card manually
·
* Programmable 16gb SD card
·
* 34 preloaded sound fonts
·
* Customizable blade effects
·
* 11 default blade modes (adding more future
firmware)
·
* Multiple Blade styles (more in future
firmware)
·
* Accent swing sounds
·
* Smoothswing
·
* One-button configuration
·
* Deep sleep adjustment
·
* App-controlled colour palette
·
* Volume app controlled 1-100 dial in
·
* RGB/PIXEL Toggle
·
* Flash on clash toggle on/off
·
* Blade brightness Adjustable
·
* Blade length adjustable
·
* Cross guard side blade adjustments
·
* Audio Cue for Hilt Commands
·
* Gesture control adjustment
·
* Adjustable light effect timing
·
* Blade Mode Toggle on / off
·
* Blade speed ignition control
·
* Blaster Block
·
* Flash on clash Control
·
* Clash Sensitivity Adjustment
·
* Melt
·
* Spin
·
* Force Effects
·
* Drag effect
·
* Post-off
·
* Pre-on
·
* Lightning block
·
* Begin lighting lock
·
* End lighting lock
·
* Stab
·
* Pre in
·
* Side out
·
* Multiple ignition styles
Xenopixel Instructions
ACTIVATE SABER: hold the
button for 2 seconds.
TURN ON SABER/IGNITE:
click the button once.
WHILE SABER BLADE IS
OFF:
ADJUST VOLUME: hold
button 0.5 second/button LED flash one time/countdown sound one time, then
release.
CHANGE LIGHT EFFECT:
hold button 1 second/button LED flash two times/count down sound two times,
then release.
CHANGE BLADE MODE:
hold button for 1.5 seconds/button LED flash three times/count down sound three
times, then release.
CHANGE TO LAST FONT:
hold button for 2 seconds/button LED flash four times/count down sound four
times, then release.
CHANGE TO NEXT FONT:
point down the hilt and twist (counterclockwise and then clockwise)
PLAY MUSIC: point up
hilt and twist (counterclockwise and then clockwise)
WHILE SABER BLADE IS
ON:
LOCK UP: hold button
and clash hilt.
DRAG: hold button 0.5
second/button led flash one time/countdown sound one time, then release.
INFINITE COLOR
CHANGE: hold button 1 second/button LED flash two times/countdown sound two
times, then release.
STANDARD COLOR
CHANGE: point down the hilt, hold the button, and twist (counterclockwise and
then clockwise)
TWIST COLOR CHANGE:
point down the hilt, hold the button, and twist (clockwise and then counterclockwise)
FORCE EFFECT: point
up the hilt, hold the button, and twist (clockwise and then counterclockwise)
BLASTER/BLASTER
DEFLECT: click the button.
STAB: thrust the hilt
forward
SPIN: spin the hilt
quickly
MELT: hold the button
and stab the hilt (twist to change melt colour).
LIGHTNING BLOCK: hold
the button and pull the hilt inwards.
MULTI LOCK MODE: Enter
LOCK UP first, then hold the button for 0.5 seconds/button. LED flash one
time/countdown sound one time, then release. Same control to exit mode.
MULTI-BLOCK MODE:
hold the button and swing the saber. Same control to exit mode.
TURN OFF SABER: hold the
button for 1.5 seconds.
DEEP SLEEP/DEACTIVATE
SABER: hold the button 10 seconds, after the saber blade is off.
PIXEL TO RGB/RGB TO
PIXEL: hold the button for 13 seconds when the saber blade is off.
Additional Information:
What to do when you first get your new saber:
When you get your new
saber, please put it on charge immediately. While it is on charge, have a read
of the instructions. It’s going to take a few tries to get used to all the
features via the control button, but when you do it is easy. You mustn’t let
the battery fully discharge, so our advice is to fully charge the saber when it
says low battery or if you haven’t used it in a while; if this happens, you may
need to purchase a separate battery charger to bring it back to life. We are available
for help and support if you have any issues using the features. Please message
us.
Delivery
All our Sabers are
sent via courier, with free standard delivery, unless you choose an alternative
service. We will ship it with the most appropriate courier. We will send the
saber within 12 hours of ordering. There are no collections after 9 am Saturday
until 9 am Monday. We hope you receive your order on time. However, we will
upload tracking so you can keep an eye on it. If you have a special request,
please ask us before buying; we try to accommodate all reasonable
requests.
Warranty
All sabers come with
a 1-year manufacturer warranty, not for accidental damage. If you need support,
please message us before doing anything, as any changes you make may invalidate
the warranty i.e., buying spare batteries that do not meet the correct spec. If
you have caused some accidental damage, we will still be able to help, i.e., if
you have snapped the blade, we can replace it at a discounted price.
Help and Support
I am
always available to help and support you to ensure you get the best
experience from your new saber. Just message me on eBay, and we can work out
the best way of providing what you need.
Warning:
This product is not a
toy Lightsaber so taking the time to learn how to handle and use the features
properly is advised.
Fully charge the
saber before operating. Use only the included cable with 5v1a USB or 5v Wall
charger. Failure to follow this instruction can result in damaged electronics.
CE Certificate no:
BSTXD200414606402EC
Disclaimer
Domms sabers have no association with Star Wars, Lucas Films or Disney.
Our Lightsabers are not affiliated with the Star Wars franchise.