Ø 1mm to 30mm
M2-AL HSS-E High Speed Steel Four Flute Spiral Router Bit End Mill CNC Milling Cutter Tool for Steel
High-quality materials, excellent craftsmanship, safe, reliable and durable, long service life, wear resistance, high hardness, sharp and high cutting efficiency. Many size and complete specifications, convenient and flexible installation, convenient maintenance and better cost performance.
Made of M2-AL
high-speed steel（W6Mo5Cr4V2Al）, the hardness, flexural strength, and impact resistance are enhanced after heat treatment, and the forging performance and cutting performance are excellent, saving manufacturing time.
Full grinding, spiral groove, large amount of chip remove, avoid sticking blade, significantly improve production efficiency.
The universal chamfered round shank is easy to use, has good compatibility, enhances the anti-vibration and cutting speed of the milling cutter, and makes the clamping firmer without slipping.
These High
Speed Steel Four-flute cutters were specially developed for machining steel. Mainly used for side milling and face milling.
● Material: High
Speed Steel (HSS-E) (M2-AL) (W6Mo5Cr4V2Al)
●
4-Flute
● Helix angle: 35 degrees
● Hardness: HRC65-68
●
Cutting range: Semi-finishing, Finishing
●
Tolerance Accuracy: -0.02 to -0.01
●
Applicable Materials: Die Steel, Carbon Steel, Structural steel, Non-synthetic Carbon Steel, etc. （＜HRC32）
●
Applicable Machines: Milling machine, CNC machining center, Router, Engraving machine and other high-speed machines.
●
Cooling Method: Air cooling, Oil cooling
● Size = Cutting Diameter * Flute Length * Overall Length
:
| Size (mm) |
Cutting Diameter (mm) |
Flute Length (mm) |
Overall Length (mm) |
Shank Diameter (mm) |
| Ø 1 x 5 x 60 | 1 | 5 | 60 | 6 |
| Ø 1.5 x 6 x 60 | 1.5 | 6 | 60 | 6 |
| Ø 2 x 8 x 60 | 2 | 8 | 60 | 6 |
| Ø 2 x 15 x 65 | 2 | 15 | 65 | 6 |
| Ø 2.5 x 8 x 60 | 2.5 | 8 | 60 | 6 |
| Ø 3 x 12 x 60 | 3 | 12 | 60 | 6 |
| Ø 3 x 20 x 68 | 3 | 20 | 68 | 6 |
| Ø 4 x 15 x 60 | 4 | 15 | 60 | 6 |
| Ø 4 x 24 x 68 | 4 | 24 | 68 | 6 |
| Ø 5 x 17 x 60 | 5 | 17 | 60 | 6 |
| Ø 5 x 24 x 68 | 5 | 24 | 68 | 6 |
| Ø 6 x 20 x 60 | 6 | 20 | 60 | 6 |
| Ø 6 x 30 x 75 | 6 | 30 | 75 | 6 |
| Ø 7 x 25 x 66 | 7 | 25 | 66 | 8 |
| Ø 7 x 40 x 80 | 7 | 40 | 80 | 8 |
| Ø 8 x 25 x 66 | 8 | 25 | 66 | 8 |
| Ø 8 x 38 x 82 | 8 | 38 | 82 | 8 |
| Ø 8 x 60 x 110 | 8 | 60 | 110 | 8 |
| Ø 9 x 30 x 75 | 9 | 30 | 75 | 10 |
| Ø 9 x 45 x 90 | 9 | 45 | 90 | 10 |
| Ø 10 x 30 x 75 | 10 | 30 | 75 | 10 |
| Ø 10 x 45 x 95 | 10 | 45 | 95 | 10 |
| Ø 10 x 60 x 110 | 10 | 60 | 110 | 10 |
| Ø 11 x 35 x 85 | 11 | 35 | 85 | 12 |
| Ø 12 x 35 x 85 | 12 | 35 | 85 | 12 |
| Ø 12 x 53 x 110 | 12 | 53 | 110 | 12 |
| Ø 14 x 35 x 85 | 14 | 35 | 85 | 12 |
| Ø 14 x 53 x 110 | 14 | 53 | 110 | 12 |
| Ø 14 x 100 x 160 | 14 | 100 | 160 | 12 |
| Ø 16 x 40 x 95 | 16 | 40 | 95 | 16 |
| Ø 16 x 63 x 123 | 16 | 63 | 123 | 16 |
| Ø 16 x 100 x 160 | 16 | 100 | 160 | 16 |
| Ø 18 x 40 x 95 | 18 | 40 | 95 | 16 |
| Ø 18 x 63 x 123 | 18 | 63 | 123 | 16 |
| Ø 18 x 100 x 160 | 18 | 100 | 160 | 16 |
| Ø 20 x 75 x 141 | 20 | 75 | 141 | 20 |
| Ø 20 x 100 x 160 | 20 | 100 | 160 | 20 |
| Ø 22 x 45 x 110 | 22 | 45 | 110 | 20 |
| Ø 22 x 75 x 141 | 22 | 75 | 141 | 20 |
| Ø 25 x 50 x 120 | 25 | 50 | 120 | 20 |
| Ø 25 x 90 x 166 | 25 | 90 | 166 | 25 |
| Ø 30 x 90 x 166 | 30 | 90 | 166 | 25 |
● Exact dimensions can also be viewed in the photo gallery.
●
Use Tips:
1. Appropriately reduce the cutting speed and feed rate, which can prolong the service life of the milling cutter.
2. When working, it is necessary to add cutting fluid to protect the knife edge, so that the cutting is smoother.
3. When the oxide film or other hardened layer remains on the surface of the workpiece, it can be cleared by up-milling.
1. Appropriately reduce the cutting speed and feed rate, which can prolong the service life of the milling cutter.
2. When working, it is necessary to add cutting fluid to protect the knife edge, so that the cutting is smoother.
3. When the oxide film or other hardened layer remains on the surface of the workpiece, it can be cleared by up-milling.
4. Before using the tool, please measure the tool deflection accuracy. When the tool deflection accuracy exceeds 0.01mm, please correct it before cutting.
5. The shorter the length of the tool protruding from the chuck, the better. If the tool protrudes longer, the rotation speed, feed speed or cutting amount should be reduced.
6. During cutting, if abnormal vibration or noise occurs, please reduce the speed and cutting volume until the situation improves.
5. The shorter the length of the tool protruding from the chuck, the better. If the tool protrudes longer, the rotation speed, feed speed or cutting amount should be reduced.
6. During cutting, if abnormal vibration or noise occurs, please reduce the speed and cutting volume until the situation improves.
● You can find more products in different material, type, color, sizes, quantity and shapes in our shop！ If you have special needs, please contact us, we can customize according to your needs!
● Note:
- Please allow minor errors due to manual measurement. Thank you for your comprehension.
- Monitors are not calibrated, the element color shown in the photos may differ slightly from the real object. Please take the real one as standard.
Package included : ( According to your choice )
On 12-Mar-22 at 03:15:09 GMT, seller added the following information: