Assembled DCP-1K MKII Fully Discrete Pure Class A Headphone Amplifier board with VU header


PCB Size: 21.5mm*17.7mm

PCB thickness: 1.6mm

Works voltage:

AC32V-0-AC32V   (about 0.8A) 

0-AC12V   (about 0.8A)

AC15V-0-AC15V  (about 1A)


power transistor is Original Hitachi 2SK1058  2SJ162.



On this board with VU header Drive circuit. no need extra Drive board.

VU header draws:

图片 6 - 34mm 音频电平/DB 电平表 vu 标头带驱动板



     DCP-1KMKII circuit is derived from the classic differential push-pull output form, Sound schooling is very important. We spent nearly a year on sound schooling, from the selection of transformers and transistors, to the setting of static currents at all levels, and the matching of capacitance and resistance, all of which are targeted, and finally achieve the desired effect. The overall sound of DCP-1KMKII: The background is dark and quiet, the resolution is high, the details are rich, the charm, the emotion, the three-frequency connection is very smooth, the low frequency is soft, and a certain frequency band is not particularly prominent. The higher the sound source and headphone level, the more it can reflect the potential and due strength of the DCP-1KMKII.



Test Data:

Test Platform: American Audio Comprehensive Tester AP-ATS-2

Test condition: signal 1VPP (1KHZ)

                 The potentiometer is turn to the maximum ( is equal to the through potentiometer)

                 Load impedance 300 ohms (class equal to 300 ohm headphones)

Input Impedance: 47K

Maximum output power:

       32ohm   9.7W,

       300ohm  1W,

       600ohm  0.52W





Package incldue:   DCP-1K MKII Fully Discrete Pure Class A Headphone Amplifier board   X 1

                              34mm VU header  X 2pcs



Power transformer link:

https://www.ebay.com/itm/325113271012




we also have the case for this board. if you need. Please contact us.




THD+N Distortion:



Signal to Noise Ratio (A-weighted) :



Channel separation :


Intermodulation Distortion:


Frequency response curve :





















Payment:

We ONLY accept PayPal. Payment must be made within 3 days of the auction end time. Non-Paying bidders will be reported.

All items will be shipped within 1-3 business days (from china)upon receipt of payment.

We ONLY send item to buyer's registered Paypal address,Buyer must be responsible for their postal address


Customs & duties:For cross-border transactions,.we are not responsible for tariffs and duties. However, buyers may be responsible for  actual, applicable tariffs, and duties as requested by respective country laws

 

Return & Exchange:

>> Some items return is accepted within 7 days after the buyer's receiving the item.(please see the detail describe)[In case of DOA (Dead on Arrival), please report within 3 days]

>> Returned item has to be new, unworn and in its original condition.
>> After getting the returned item, we will refund the customer at the item's price ( excluding the shipping costs to and from )

DataCaciques