Worlds Smallest Common Rail Injector, Pump and Fuel Rail Testing Bench
Model: Mini CRDI 101 C
Complete with all computer hardware, software and CR injector and pump test plans for Bosch, Delphi, Denso and Siemens.
Introduction:-
Introducing the World’s Smallest dedicated Common rail injector, pump and fuel rail testing bench designed for quickly testing all kinds of common rail injectors, pumps and fuel rails of Bosch, Delphi, Denso and Siemens make.
Function / Application:-
- It can test CR Injectors of both Solenoid and Piezo technology - up to two at a time / simultaneously - It is used to diagnose the Faulty Common rail injector by testing it for its spray pattern, Output delivery to back leakage ratio, Full load delivery, No load delivery, etc. User can also measure the solenoid / Piezo sensor resistance of the injector.
- Common Rail Pumps that can be tested include Bosch CP1 / CP2 / CP3,
- One can also test the pressure sensor and solenoid (fuel rail pressure control valve / DRV / FCA) mounted on the fuel rail for proper function. User can also measure solenoid resistance of the DRV.
- The user can vary the pressure developed in the system from 0 – 2000 BAR by controlling the percentage opening of the Pressure control valve / solenoid mounted on the fuel rail fitted on this bench through the CRT 7000 simulator installed on this test bench.
- The bench comes fitted with the Common rail injector, pump and fuel rail simulator (CRT 7000) attachment through which user can control the following:-
a. Pressure in the system (0 - 2000 BAR) by controlling the percentage opening of the fuel rail pressure control valve / solenoid / DRV from 0 - 100 %
b. The injector pulse width (W) - Which determines the volume of delivery per spray.
c. Injector frequency of spray / RPM of engine (N) - Which controls the number of sprays per second.
d. Monitor the fuel rail pressure (Also the system pressure) which is displayed digitally on the CRT 7000 LCD screen and also on the computer software screen , which is read constantly from the pressure sensor mounted on the fuel rail.
- Extremely compact and light weight test bench, ideal for diesel workshops who intend to start common rail injector and pump testing. Also ideal for small workshops which have a space constraint to accommodate a bigger test bench. (Refer below for weight and dimensions)
- Computer, keyboard and mouse fitted on to the test bench along with the CRT software to control and monitor all CR testing parameters.
Test Bench Specifications and Features:-
Note: All our test benches are assembled using the best quality international brand inputs such as ABB Motors, Schneider drives, Fenner / Gates Belts and pulleys, Dowty gear pumps, L&T switch gears etc., Hence they offer trouble free service for years and years and come with our official manufacturer warranty of two years from date of delivery.
· Main Motor (Make – ABB Motors): 5 HP, Single Phase – 220 V OR Three Phase 380 / 415 V, 50 / 60 HZ (as per customer requirement)
· Drive (Make – Schneider Electric): The CRDI 101 is fitted with a 5 HP AC Frequency / Electronic drive.
· Test Bench RPM: The user can set the desired RPM of the test bench anywhere from 0 – 4000 RPM. With electric push buttons to increase / decrease speed of the bench.
· Injector Delivery & Return Measurement: Injector output delivery and return / back leak is measured in test tubes fitted on to the bench. The bench is also fitted with a digital tachometer, through which the user can control the number of strokes and time for which the reading of Back flow / return vs. output delivery of the CR injector is recorded by the bench. The test then automatically stops once the set number of stroked are reached. The tubes can then be electrically drained via a push button on the bench.
· CR Pump return measurement: A dedicated
· Pump return, Injector Output delivery / Return pipes and adapters are provided with the bench which connect the CR injector output and return to the measurement test tubes and the CR pump return to the
· The test bench comes fitted with a Bosch CP1 common rail pump complete with its coupling and a foundation which is suitable for all kinds of common rail pumps. The test bench also comes fitted with a Bosch fuel rail fitted with a rail pressure sensor and fuel rail pressure control valve / solenoid / DRV along with a fuel rail stand. One can control the pressure in the system from 0 – 2000 BAR by controlling the percentage opening of this solenoid / control valve through the CRT 7000 system. Also the pressure in the system is read and monitored through the pressure sensor fitted on the fuel rail and is displayed digitally on the LCD screen of the CRT 7000.
· The test bench comes complete and fitted with all high pressure pipes, electrical couplers for all kinds of common rail injectors, pumps and fuel rails, and all other necessary accessories to enable trouble free and speedy CR testing.
· The Common rail testing area is well shielded with an unbreakable transparent acrylic shielding box, which can be lifted up when desired. This is for the safety and protection of the operators when observing spray pattern / performing other injector and pump tests etc. as the pressures involved in CR testing are very high.
· The bench is fitted with a digital tachometer with stroke counter; to take delivery readings the user can enter the desired number of strokes for which the reading has to be taken.
- The bench also comes fitted with an exhaust system in the main shielded enclosure area. This is provided to help remove the spray fumes produced during injector spray pattern tests.
· Diesel Fuel Tank Capacity: 25 Liters
· Dimensions: L X W X H - 95 X 78 X 72 (In centimeters / cm)
· Net Weight: 210 KG
· Gross Weight (With Wooden packaging): 340 KG
· Power Supply: 220 V, Single phase OR 380 - 440 V, 3 phase OR Custom as per customer’s requirement.