O2 Sensor Type D-09
O2 Sensor Type D09
O2 Sensor Type D09 suitable for Analox Mini O2, OMS, UBS
The O2 - Scuba Diving Sensor Type D09 has following Specifications:
Galvanic gas sensor with an extra water repellent head space. All characteristics are based on conditions at 25°C, 50% RH and 1013 hPa.
| Electrical Connector | 2-pin Molex® on wire |
| Measurement Range | 0 - 100 Vol. % |
| Sensor Lifetime | < 3 years @ ambient air |
| Expected Operating Life | ~ 500,000 Vol.% h |
| Initial Output Signal | 22 to 30.5 μV @ dry ambient air |
| Response Time t90 | < 5 sec |
| Drift | < 1 % volume O2/ month @ air, averaged across 12 months |
| Linearity Error | < 3 % @ 100 % O2, applied for 5 min |
| Zero Offset Voltage | < 150 μV in 100 % N2, applied for 5 min |
| Operating Temperature | 0 to 45 °C |
| Pressure Range | 600 to 1750 hPa |
| Influence of Humidity | -0.03 % rel. O2 reading per % RH |
| Recommended Load Resistor | ≥ 10 kOhm |
| Temperature Compensation | NTC |
| Interferences | none to He, H2 and CO |
| Weight | approximately 24 g |
| Material in Contact with Media | PA, PPS, PTFE, stainless steel |
Storage conditions
| Temperature Range | recommended: 5 to 30 °C, maximum: -20 to 50 °C |
| Humidity | up to 100 % Rh, |
| Shelf Life | < 6 months recommended |
You can find some more product informations here:
