• Fitment:
  • Make
  • Model
  • Year
  • Trim
  • Engine
  • Chevrolet
  • Cruze
  • 2016
  • Premier Sedan
  • 1.4L
  • Chevrolet
  • Cruze
  • 2017-2018
  • Premier Hatchback
  • 1.4L
  • Chevrolet
  • Cruze
  • 2016-2018
  • LZT Sedan
  • 1.4L

    • Primered Front Bumper Cover For 2016 2017 2018 Chevy Cruze w/o Park Assist

    Fitment:

    Make

    Model

    Year

    Trim

    Engine

    Chevrolet

    Cruze

    2016

    Premier Sedan

    1.4L

    Chevrolet

    Cruze

    2017-2018

    Premier Hatchback

    1.4L

    Chevrolet

    Cruze

    2016-2018

    LZT Sedan

    1.4L
    Chevrolet Cruze 2016-2018 LT Sedan 1.4L/1.6L
    Chevrolet Cruze 2017-2018 LT Hatchback 1.4L/1.6L
    Chevrolet Cruze 2016-2018 LS Sedan 1.4L/1.8L
    Chevrolet Cruze 2016-2018 L Sedan 1.4L

     

    Note:

    In order to deliver the bumper to your hand as soon as possible, The bumper will be placed in a special custom box, but it will not affect its performance.Brand New in the Box - Fit and Quality Guaranteed!

    If in any case the lip became warped, simply lay it on a flat surface under the sun or use a heat gun gently heat up the warped area. The poly urethane material will restore back to its original shape when heated and stays that way after it cools down.

     

    Instruction：
    Outdoor Method:
    1. Find a spot that gets a lot of direct sunlight (it will need to be in the sun for up to 4 hours).
    2. Open the packaging and remove the bumper cover.
    3. Arrange the cardboard packaging to lie flat on the ground. This will serve as a clean surface for your bumper cover.
    4. Let the bumper cover sit in the sunlight for three hours.
    5. Once you hit the three-hour mark, reposition the bumper cover so that the front part is facing the floor. Leave it in this position for the remaining hour.
    Indoor Method:
    1.Use the cardboard packaging as your work surface and place the bumper cover on top.
    2.Look for creased areas on the bumper cover. Apply heat to those areas with the heat gun.
    3.Avoid pointing the heat gun at one spot for too long, as excessive heat can distort or melt the plastic. Keep the gun moving to spread the heat evenly across the surface of the bumper cover.
    4.Once the last patch of creased plastic is straightened out, you can consider the bumper cover fully unfolded.


    Item Specifics
    Type Bumper Cover
    Brand Silscvtt
    Manufacturer Part Number PO186275LT
    Fitment Type Direct Replacement
    Material Plastic
    Primary Color Black
    Other Part Number 191275123478
    Interchange Part Number GM1000A01
    Placement on Vehicle Front
    Color Black
    Finish Primed
    Manufacturer Warranty 1 Year
    Superseded Part Number 84288770, 84190084, 84051784，191275123478，GM1000A01
    Item Length 120cm
    Item Width 52cm
    Item Height 50cm
    Features The bumper will folded and shipped
    Item Length 120cm
    Item Width 52cm
    Item Height 50cm
    Features The bumper will folded and shipped

    Payment

    We accept PayPal、major Credit Cards （Amex, Visa, MasterCard, Discover）、Google Pay、Apple Pay、afterpay.

    Shipping will be arranged within 3 business day once payment is cleared.

    Shipping

     

    Return and Refund Policy

    1. We stand behind our items and offer warranty. All items are in new and working condition unless specified otherwise elsewhere in the description.

    2. All Returns - defective or otherwise - MUST BE PREAUTHORIZED to guarantee refund or exchange. Please contact us to get an authorization and return address.

    3. Replacement or Refund will be made upon receipt of the returned item. Please include tracking number so we can process ASAP. If you do not wish to wait for a replacement, please repurchase the item.

    4. ALL REFUNDS will be processed via PayPal. Please double check via PayPal history and transaction for confirmation.

    Feedback

    We strive to provide the best products and services. Your positive feedback 5 stars DSR help us do better. If anything about your transaction did not meet expectations, please CONTACT US and give us the opportunity to make things right. We are always here to help.

     

    Help - Customer Support - Contac

    Please do not hesitate to CONTACT US. You can message 24/7 on eBay for all questions and inquiries. We will get back to you within 1business days at the latest.

    Shop Category
     Store Home
     Auto Interior
     Exterior Trimming Parts
     Other
    Hot Item
    New List Item
    Primered Front Bumper Cover For 2016 2017 2018 Chevy Cruze w/o Park Assist

    Fitment:

    Make

    Model

    Year

    Trim

    Engine

    Chevrolet

    Cruze

    2016

    Premier Sedan

    1.4L

    Chevrolet

    Cruze

    2017-2018

    Premier Hatchback

    1.4L

    Chevrolet

    Cruze

    2016-2018

    LZT Sedan

    1.4L
    Chevrolet Cruze 2016-2018 LT Sedan 1.4L/1.6L
    Chevrolet Cruze 2017-2018 LT Hatchback 1.4L/1.6L
    Chevrolet Cruze 2016-2018 LS Sedan 1.4L/1.8L
    Chevrolet Cruze 2016-2018 L Sedan 1.4L

     

    Note:

    In order to deliver the bumper to your hand as soon as possible, The bumper will be placed in a special custom box, but it will not affect its performance.Brand New in the Box - Fit and Quality Guaranteed!

    If in any case the lip became warped, simply lay it on a flat surface under the sun or use a heat gun gently heat up the warped area. The poly urethane material will restore back to its original shape when heated and stays that way after it cools down.

     

    Instruction：
    Outdoor Method:
    1. Find a spot that gets a lot of direct sunlight (it will need to be in the sun for up to 4 hours).
    2. Open the packaging and remove the bumper cover.
    3. Arrange the cardboard packaging to lie flat on the ground. This will serve as a clean surface for your bumper cover.
    4. Let the bumper cover sit in the sunlight for three hours.
    5. Once you hit the three-hour mark, reposition the bumper cover so that the front part is facing the floor. Leave it in this position for the remaining hour.
    Indoor Method:
    1.Use the cardboard packaging as your work surface and place the bumper cover on top.
    2.Look for creased areas on the bumper cover. Apply heat to those areas with the heat gun.
    3.Avoid pointing the heat gun at one spot for too long, as excessive heat can distort or melt the plastic. Keep the gun moving to spread the heat evenly across the surface of the bumper cover.
    4.Once the last patch of creased plastic is straightened out, you can consider the bumper cover fully unfolded.



    We accept PayPal、major Credit Cards （Amex, Visa, MasterCard, Discover）、Google Pay、Apple Pay、afterpay.

    Shipping will be arranged within 3 business day once payment is cleared.

     

    1. We stand behind our items and offer warranty. All items are in new and working condition unless specified otherwise elsewhere in the description.

    2. All Returns - defective or otherwise - MUST BE PREAUTHORIZED to guarantee refund or exchange. Please contact us to get an authorization and return address.

    3. Replacement or Refund will be made upon receipt of the returned item. Please include tracking number so we can process ASAP. If you do not wish to wait for a replacement, please repurchase the item.

    4. ALL REFUNDS will be processed via PayPal. Please double check via PayPal history and transaction for confirmation.

    We strive to provide the best products and services. Your positive feedback 5 stars DSR help us do better. If anything about your transaction did not meet expectations, please CONTACT US and give us the opportunity to make things right. We are always here to help.

     

    Please do not hesitate to CONTACT US. You can message 24/7 on eBay for all questions and inquiries. We will get back to you within 1business days at the latest.


    All rights reserved.