Here at MadMopeds we only supply parts that we use on our own bikes and our customers bikes in our workshop so you can be assured of them being of good quality.

For larger taps fittings we only use this non kink green fuel pipe so that we can see that we have petrol or  oil running through it.

Light green, Fuel Petrol pipe for petrol, oil, diesel etc. Ethanol compliant very heavy wall thickness

250mm or 25cm long

We also sell longer 50 cm long lengths of this pipe. Check out our other listings in our store

Internal diameter of this pipe is 7.0 mm and the external diameter is 12.4 mm.

That means that the wall thickness of our pipe is 2.7 mm unlike the cheap 1.0 mm wall thickness pipe being sold 😢

NOTE... This is not your usual thin wall thickness pipe which will kink when you bend it.

This is quality fuel pipe with a good heavy wall thickness which remains flexible and soft without hardening.

Resistant to the modern E5 AND E10 fuels containing ethanol.

If you warm it up gently in hot water or with a hair dryer it will easily fit onto 8mm 9mm and 10mm barbed fittings.

Can also be used on 7mm fittings if clipped.

We sell this pipe with stainless steel hose clips to suit. See our other listings.

Pictures show it fitted onto a Fireblade 9mm tap fitting and another 8mm tap fitting

If you buy more than one length we will not cut it into 25 cm or 250mm lengths but will leave it as one length.

If you want the cheapest, best to look elsewhere. If you want the best we can find then this is it! 😊

Dispatched using free 2nd Class postage.

if you require it faster then select 1st class postage on purchase for only £1 extra.

MadMopeds