• T spike for inlet connection
• Connects to poly tube via barbed inlet
• Best Suited for use in garden beds or landscaped areas

The new range of Holman metal sprinkler spikes are an excellent choice when looking for a strong, reliable metal irrigation system. This spike is best suited for use in garden beds or landscaped areas. The inline shape allows the spike to be "cut in" to a poly pipe system any where along it's length and pushed directly into the soil. Featuring 2 x barbed ends, this spike design is able to be set up in minutes, by simply pushing on the poly pipe & clamping with a ratchet clamp. The spikes are supplied "without" spray heads so you are able to attach the style that best suits your watering requirements. Watering options: The 1/2" outlet offers a variety of different sprinklers to be connected. Commonly, an impact sprinkler is attached & the spike assembled into a poly pipe system. Available in both 13mm barb & 19mm barb sizes, the Tee Spike is ideal for connecting inline along a section of poly pipe as it runs through a garden bed. A series of spikes can be used around trees & shrubs for large landscaped areas. Pop up sprinklers are also a good option! It's very common for a sprinkler to have a female 1/2" thread and they can screw directly onto the spike. These also offer a neat solution with the nozzle protected inside the sprinkler cannister. Pop ups have a range of fixed or adjustable nozzles so any spray pattern can be found. Using a pop up on a spike, gives you the flexibility of locating this sprinkler where it's needed & then being able to easily move & re-locate the sprinkler as the plants grow. A lot easier than moving a rigid sub-surface plumbed system. The last option is attaching a poly riser with a spray head. This provides a "tall" sprinkler option and suits most garden bed applications. The height allows the spray to reach "over" the plants to fully water the surrounding area or garden bed. For any of these sprinkler installations onto the Holman metal spike. Simply screw directly onto the ½ BSP male thread and clamp down on the rubber washer to seal. Each Holman metal spike features a strong 4 sided rib, which allows installation into hard, dry or harsh soil conditions a lot easier. All along keeping the sprinkler standing firm and steady.