IMPOSSIBLE TO FIND! Unless you use MadMopeds 😁
We are a genuine UK seller with UK stock and can get this to you usually within 3 or 4 days as we post daily.
This can be delivered to you faster if you choose 1st class delivery.
Check out our fantastic feedback on petrol taps too.
Here at MadMopeds we love finding solutions to problema and we don't just sell spares. We use these on our own bikes plus our customers machines so we know that we can sell all our parts with confidence!
This will fit your classic Honda
* CBX1000 1979 to 1982 Super Sport
* CB1100F 1983
* XBR500
* GB400
* GB500 and Super Sport
* CB900C
* VF750 C
motorcycle if you have a tank stub with M20 x 1.0 Metric threads.
Pictures show one fitted to a 1983 CB1100F Bol D'Or and a VF750C
It can be used for other models too
This Replaces OEM Honda part number 16950 422 015 as well as others and which are discontinued and impossible to find now.
YOU MUST CHECK YOUR THREAD SIZE BEFORE BUYING THIS.
Measure the outside diameter of the threaded stub on the tank and not the inside of the tap please 😁
We do have other sizes available.
Earlier 1000 and 1100 models may have an 18mm tap but there are no fixed and fast rules with these Honda models and years!
This is a brand new reproduced fuel tap and it has the following settings... ON, OFF and RESERVE.
There are no markings on the tap but..
1) lever down is on
2) lever up is reserve
3) lever flat or horizontal is fuel off
Simple!
Note that our tap has the fuel feed on the bottom which is different to the originals but the fuel pipe fits nicely under the carburettors
The casting of our taps is superb and they are all checked for smooth operation before dispatch. These are very nice taps 😊
Our taps are as good as you are going to buy, I've searched high and low for a long time for taps that are the correct thread rate and size for these bikes and these are the best!
We check each tap before dispatch for any casting errors and tightness of the tap.
To date, we have had no returns or issues with my supplier and manufacturer.
Fitting this will eradicate all the usual problems of old taps not working and fuel not flowing or leaking taps.
Technical specifications:
These taps are very well made with very good casting material and tolerances, they are not made from 'monkey metal' like lots of other cheap taps are. I've bought them!... and binned them!
This will be a direct fit on your bike.
Connection to fuel line: 7mm internal diameter pipe. (we sell this separately)
Connection to fuel tank : 20mm x 1.0mm metric fine thread
Taps are obviously supplied with a fibre or rubber washer/tank seal
We sell very good quality heavy wall thickness E5 and E10 resistant petrol pipe to suit this tap. Search for 7mm 8mm petrol pipe in our eBay store search bar.
Dispatched with 2nd Class parcel postage.
1st class postage is available at only £2 extra.
Please could you make your selection on purchase.
MadMopeds UK