Compact: This is officially the highest performing unit we have seen of this size. Majority of the hobbyist retrofitters started with the H1 Bixenon projector. If you are familiar with the H1, the dimensions of the Micro D2S Bixenon projectors are nearly identical. These use the exact same mounting points and overall foot print as an H1 projector. The main difference is the threaded shaft size is larger in diameter; which is 35mm vs the 20mm found on the H1. 

Easy Install:  The Micro D2S will fit using the thread shaft method on reflectors just like the H1, or mount up to H1 bolt pattern retrofit brackets (*not compatible with H1 brackets that use the 6 lens holder screws mounts). Have a tight fitting high beam that you want to do a quad projector conversion on? No problem! 

OEM D2S: The primary reason why we are seeing such high performance out of this unit is the use of OEM D2S bulbs. Want the best? Pair these up with Osram CBB, Osram XNL, or Philips Xtreme Vision Gen 2 bulbs and prepare to be blown away. Capsule alignment is never an issue like it is on H1 projectors. 

Light Distribution & Cutoff: Micro D2S provides a clean sharp cutoff line that does not bow down on the edges. This gives you excellent width; much better than most aftermarket D2S projectors on the market. Plenty of color at the cut off. If you study output photos of the H1 bixenon, the distribution of the beam pattern is extremely center weighted. You usually see the two "streaks" right down the center of the output. Output shots are rarely consistent because the aftermarket H1 bulbs are usually not 100% when it comes to bulb capsule alignment. With this D2S unit, the center intensity zone is better spread out, and as you go lower away from the center, the intensity reduces which is exactly what you are looking for. Say no to increased foreground lighting! 

Shroud Choices: Limitless! You can use anything from the Mini Gatling gun to the Panamera 2.0 shrouds. Pair them up with centric rings to use full size shrouds. 

HID Ballasts: Morimoto HID ballasts are designed in California by Morimoto's engineer, Yoshi Ishida, the Morimoto XB 2.0 HID Ballasts are just as good looking on the outside as they are well-engineered on the inside. They are available in both 35w and 50w versions, use proprietary software by the pros at Hylux paired with packaging perfection from the masters at Morimoto. This is today's most modern iteration of a model that has sold more than half a million units since inception, and we don't think it can really get any better! 


Wire Harness: As one of the most important parts in any HID lighting upgrade; don't skimp out when it comes to your wiring. It doesn't matter how good your ballasts are. How good your bulbs are. If your harness is a piece of crap, when it gives out your headlights are gonzo. Morimoto's harnesses are the best on the market and easily worth their premium price compared to cheaper alternatives. No matter which one is right for your application, the harness features triple-sealed central relay packs, 14ga stranded copper wiring, over-molded fittings, and plug-n-play functionality. This will ensure everything properly (and permanently) works with your vehicle's original in-cabin controls.

Optional Can-bus Harnesses: Instead of a traditional relayed harness that draws power from the battery, Morimoto's Standalone Canbus harnesses use two individual sub-harnesses to keep a load on the factory wiring. Recommended for vehicles that recognize when a bulb is out, these contain a series of capacitors and resistors to trick the car into thinking nothing has changed and help you avoid annoying "bulb out" warnings. We generally recommend them for use on most modern European applications instead of normal harnesses since they do a great job at providing stable power to the ballasts and canceling bulb out warnings.

Optional Housing Sealant: Protection is priceless! When you're putting together a set of high-end headlights, the last thing you want is moisture in 'em the first time it rains outside. RetroRubber is the most effective way to make sure the original seal is fully restored. For the small price, why anybody wouldn't prevent their new headlights from fogging up is beyond us. It'll be the best twelve bucks you've ever spent.

Confidence: Order with confidence when purchasing through our website. The products offered have been thoroughly tested to make sure they meet our strict quality standards to ensure the best reliability and performance. We always provide honest feedback on products and helpful tips for any project due to our extensive experience with all makes and models. We offer competitive pricing, fast shipping, and the latest and greatest products from the top manufacturers. Contact us today with any questions; you won't regret it!

WHAT'S INCLUDED
2x Projectors: Morimoto Micro D2S Clear Lens Bi-Xenon LHD or RHD
2x Ballasts: Morimoto XB35 D2S or Hylux 35W (Hylux provided by default)
2x Bulbs: Morimoto XB D2S 
2x Shrouds: User Preference
1x Wire Harness: Morimoto HD Relay or Moto Control or Can-Bus
Warranty: 35w 5 Years 

COMPATIBILITY
Projectors: Low and High Beam Capable
Wire Harness: Match your original bulb size. Don't know it? Look it up here.
Vehicles: Universal Fit (may require modification)
Compatible With: 35W, 50W AT YOUR OWN RISK