Here at MadMopeds we don't just sell spares. We use these on our own bikes plus our customers machines so we know that we can sell all our parts with confidence!

This will fit your ...

* Honda XL 1000 Varadero from 1999 to 2013

Which has twin taps. This tap is for the LEFT HAND SIDE OF THE TANK.

NOTE...

The Right hand tap has a fuel outlet from the rear of the tap.

This tap may also be used on the right hand side if you are able to reroute the fuel pipe.

OEM 16960-MBT-613

PLEASE CHECK OUT WHETHER THIS IS POSSIBLE ON YOUR BIKE BEFORE PURCHASE.

DO NOT BUY IT UNLESS YOU HAVE LOOKED AND CHECKED

This is a brand new, excellent quality reproduced fuel tap. The HONDA version is £200 new now 😁

This tap DOES NOT include the plastic on off lever so please retain and reuse your old one.

NOTE CAREFULLY PLEASE...

To fit our tap. You may need to slightly reduce by filing the size of the metal square part that the plastic lever sits on by 0.5mm

Also the length of your plastic lever may also need to be slightly reduced to enable it to be screwed onto the tap. The square output shaft on the OEM is longer than ours. See our images

We are a genuine UK seller with UK stock!

Check out our fantastic feedback on petrol taps!

We can get this to you usually within 4 days as we post daily. Even faster if you select 1st class delivery.

This will fit your Honda XL 1000 Varadero

Replaces Honda OEM Part Numbers 16950-MBT-613 

The casting of our taps is superb and they are all checked for smooth operation before dispatch.

Please take a good look at the pictures of our taps and see if you can find better castings elsewhere!

Don't mess about trying to reseal your old original fuel tap. We've tried all that and it just doesn't last. They generally leak or just don't pass fuel or just flow continuously which can lead to the carbs flooding and your engine filling up with fuel.

OK so this tap not original Honda but it is a much cheaper alternative than trying to get an original one.

Our taps are as good as you are going to buy, I've searched high and low for a long time for taps for these bikes that are just right and these are the best!

To date, we have had no returns or issues with our supplier and manufacturer.

Technical specifications:

These taps are very well made with very good casting material and tolerances, they are not made from 'monkey metal' like lots of other cheap taps are. I've bought them!... and binned them!

Connection to fuel line: 10mm internal diameter fuel pipe

We sell ethanol resistant fuel pipe too if you haven't already made the change

Our taps are supplied with a seal and have an internal syphon pipe which is also a filter. We wouldn't recommend removing this tap once it's fitted and sealed so we recommend that you fit an inline filter too.

We also sell spare filters for this tap too

Please compare yours with my pictures before purchase.

Dispatched with 2nd Class parcel postage unless you require 1st class postage at £2 extra.

Please could you make your selection on purchase.

MadMopeds