Here at MadMopeds we only supply parts that we use on our own bikes and our customers bikes in our workshop so you can be assured of them being of good quality.

For larger taps we only use this non kink green fuel pipe so that we can see that we have petrol or oil running through it.

Light green, Fuel Petrol pipe for petrol, oil, diesel etc. Ethanol E5 and E10 compliant heavy wall thickness

500mm or 50cm or approx 19 inches long complete with 2 stainless steel hose clips to suit this pipe. 

We also sell shorter 250 mm long lengths of this pipe. Check out our other listings in our store

Internal diameter of this pipe is 7.0 mm and the external diameter is 12.4 mm.

(note this can vary slightly from our batches)

That means that the wall thickness of our pipe is 2.7 mm unlike the cheap 1.0 mm wall thickness pipe being sold 😢

NOTE... This is not your usual thin wall thickness pipe which will kink when you bend it and turn to jelly with E5 AND E10 petrol use.

This is quality fuel pipe with a good very heavy wall thickness 

Resistant to the modern fuels containing ethanol.

If you warm it up gently in hot water or with a hair dryer it will easily fit onto 8mm 9mm and 10mm barbed fittings.

Can be used on 7mm fittings with clips.

NOT FOR USE INSIDE FUEL TANKS WITH TOTAL IMMERSION 

Pictures show it fitted onto a Honda Fireblade 9mm tap and another 8mm tap

If you buy more than one piece we will not cut it into 50 cm lengths but will leave it as one length.

It's not the cheapest..... But it is the best! 😁 and it will last.

Dispatched using free 2nd Class postage.

if you require it faster then select 1st class postage on purchase for only £1 extra.

MadMopeds