Typical Application :

Hydraulic brake, power steering, fuel lines and transmission cooler lines, LP and natural gas.. 

 Pressure Ranges :

Temperature and type of tubing used are important factors. However, the following table is a good guide for proper selection. Temperature 730 F with copper tubing.

Tolerance :

+/- .03 on all dimensions. 

Conformance :

Meets specifications and standards of ASA, ASME,SAE and MS (Military Standards).

Assembly Instructions :

1-Cut tubing to desired length. Make sure all burrs

are removed and the ends are cut square.

2- Slide nut on tube. Threaded end “A” of nut must

face out.

3- Flare end of tube with a 450 flaring tool.

a- Measure flare diameter.

b- Examine flare for excessive thin out.

c- On thin wall, welded or brazed tubing, use double flare to prevent pinch-off and cracked flares.

4- Lubricate threads and assemble to fitting body.

Nut should be turned hand tight.