TBI to Carburetor Conversion For Nissan / Weber

Adapter converts your TBI to 38x38 mm 2-barrel carburetor.

Fits 1986 to 1989 Nissan D21 Pickup Pathfinder Z24I & VG30I TBI engines.

What makes our adapter different? 

• One-piece HIGH-PERFORMANCE adapter
• Precision machined from 6061 Aluminum
• Machined and Hand-Lapped surfaces for complete flatness
• Designed for maximum air/fuel flow
• Laser-cut gaskets from 1/32" thick Fel-Pro material
• Only uses 2 gaskets!  Eliminates tiny sealing areas in other designs

Description: 

All these adapter are made exactly the same dimensionally.  They are all the same high quality.  This adapter WILL fit the application described.

* Confirm you need THIS ITEM before buying *

** Read full details of this listing and confirm fitment before buying **

*** Adding a buyer's note for anything other than what we are listing will NOT get you something different... We will still ship the item being advertised in this listing so that we can deliver the item in a timely manner ***

Here is a high performance and high-quality adapter that will convert your TBI to a 2-barrel 38x38 mm Carburetor that uses only two gaskets instead of the typical three gaskets used in other adapters.  Designed for maximum air and fuel flow by rotating 90 degrees for best alignment over the intake, large radius in the corners for smooth flow, and large chamfers from both sides for maximum volume between carburetor and intake.  Precision machined in our shop located in Oregon.  Our adapter gaskets are laser cut from Fel-Pro gasket material.

Includes the following:

• Qty 1 - Precision machined 6061 Aluminum Adapter
• Qty 4 - M8 x 1.25 x 25mm Length Button Head Cap Screws
• Qty 4 - M8 x 1.25 x 20mm Length Button Head Cap Screws
• Qty 1 - Adapter to TBI Gasket
• Qty 1 - Adapter to Carburetor Gasket

Please note:

 

In addition to the adapter, you will usually need a fuel regulator to reduce the amount of fuel going to your carburetor when switching from TBI.  The adapter is designed for a weber style 38x38 mm carburetor.  Depending on the carburetor you use, you may need additional hardware or customization to hook up your throttle cable.  This listing is for the adapter components shown above.

 

This adapter gives you the ability to source your own carburetor.  If you need a new carburetor, we’ve seen highly reviewed carburetors starting at 150.00 and adjustable fuel regulators starting at only 35.00!  Just do your research and make a good decision.

 

At least you’ll be starting with the highest quality adapter available at an unbeatable price!

 

Please Read:

On the Nissan pickup we tested these adapters on, we hooked the throttle cable up on the passenger side of the carburetor without any issue.  Visualize your application carefully to insure this adapter or any other along with the carburetor you choose will be the right combination for you.  We have provided dimensions and good pictures for you to double check that this adapter will fit your application.

** PLEASE CONFIRM FITMENT PRIOR TO ORDERING **

** PLEASE CONFIRM YOU NEED THIS ITEM BEFORE BUYING **

 **** Proceeding to checkout and buying this item means you agree that it is what you need and that you understand that there is NO RETURNS on this item ****

Designed and machined by Matthews Innovations, LLC