ONE METER LONG
Suitable
for petrol, ethanol, diesel, oil, water. (E10-E85 compatible). The best
quality hose with internal reinforcement and fully compatible with all
modern fuels
Suitable for all low pressure hose applications (less than 50psi) petrol, oil, water etc.
10.4mm
internal diameter, 15.5mm external diameter. Rubber with reinforcement
strands. Note that the wall of this hose is 5mm thick - beware other
hose available elsewhere with a thin wall which has been known to
degrade/burst fast with predictable unfortunate consequences.
Greatly outlasts ordinary hose.
Protective braid greatly reduces possibility of breakdown through chafing.
Stainless reflective weave helps prevent fuel vapourisation problems and gives the hose a great quality look and feel.
Can
be fitted with rubber ends and clips or high quality Magna Clamps
(rubber ends, clips and MagnaClamps not included, see my other listings
for these)
Rubber with reinforcement stands (unlike cheaper imported versions on
the market) - see photo
This hose was originally marketed as a hose upgrade since the 1960s under the Smiths Petroflex brand.
Cut to your lengths required with a serrated edge eg kitchen bread knife or hacksaw
Sold in a continuous length, so if you buy 3 meters you will get a 3 meter long piece
For more details please see http://www.ratsport.com/PBSCCatalog.asp?CatID=1668901
PLEASE
NOTE YOU ARE ONLY BUYING THE HOSE:
IF YOU NEED END CAPS TO SUIT (RUBBER
VARIETY OR CHROME MAGNA CLAMP VARIETY) PLEASE SEE MY OTHER LISTINGS AND BUY ONES LARGER THAN 15.5MM.
IF
YOU ALREADY HAVE END CAPS/CLAMPS (OR YOU ARE BUYING ELSEWHERE) PLEASE
NOTE THE EXTERNAL DIAMETER OF THIS HOSE IS 15.5MM SO YOU WILL NEED A
CAP/CLAMP LARGER THAN THAT.