|
|
|
|
|
|
|
|
|
|
|
Features:
Brand New and Never used Parts.
Made by Premium Quality Material.
Extremely Durable Aftermarket Part.
Easy to install and prefect replacement for original parts.
Compatible with: Lennox, Whitfield Stoves.
Lennox
Montage
Whitfield
Advantage II-T
Advantage II-T C
Advantage Plus FS
Advantage Plus INS
Optima 2 FS
Optima 3 FS
Profile 20 FS
Profile 30 FS
Profile 30 Insert
Quest Plus FS WP4
Quest Plus INS WP4
Traditions T300P
Traditions TP300
Traditions TP340
Replacing the H8127 igniter in a Whitfield or Lennox/ IronStrike Montage pellet stove:
1. Unplug the stove
2. Remove the rear service panel
3. Remove the auger motor from the shaft and remove auger mounting plate
4. On some models and the tools you may be using, the igniter can also be accessed from the left side by removing the room blower
5. Locate the igniter under the hopper, it will have white braided wires
6. Disconnect wires from old igniter and remove the igniter from the stove
7. using a 5/8" wrench, loosen igniter fitting by turning it CCW
8. There will be a red wire with a black cap attached to the igniter wires, this is an inline fuse and must be checked. If the fuse is blown, replace it.
9. Reinstall all items in the reverse order.
Specifications:
Part#: H8127
Replace part#: 12150213, 12140213.
Watts: 400W
Voltage: 120V
diameter: 3/8"
Length: 6"
High Temperature Wire-Fiberglass insulation (Fiberglass woven glass strands provides good insulation for use in high temperature process heating applications)
over stranded Grade "A" nickel wire. Heat Shrink used on solder joints to prevent breaking.
Package Include:
1 Pc x H8127 Stove Igniter
Item Specifics | |
---|---|
Brand : | Unbranded |
MPN : | Does Not Apply |
Part# : | H8127 |
Replace part# : | 12150213, 12140213 |
Watts : | 400W |
Voltage : | 120V |
Diameter : | 3/8" |
Length : | 6" |
Type : | Igniter |
Feature : | ESCP |
Payment:
Shipping:
Returns:
Customer Services:
Ending Soon!!! Store Category |
Durable H8127 Pellet Stove Igniter Ignitor For Lennox Whitfield Advantage II-T C
Features:
Compatible with: Lennox, Whitfield Stoves. Whitfield Replacing the H8127 igniter in a Whitfield or Lennox/ IronStrike Montage pellet stove:
Specifications: High Temperature Wire-Fiberglass insulation (Fiberglass woven glass strands provides good insulation for use in high temperature process heating applications) over stranded Grade "A" nickel wire. Heat Shrink used on solder joints to prevent breaking.
Package Include: Payment
Payment:
Shipping
Shipping:
Returns
Returns:
Customer Services
Customer Services:
|