Brake caliper adapter on model VW T5 and T6 bus/transporter for conversion to the Porsche Panamera 6-piston Brembo calipers, combined with the bracke discs of  Mercedes ML 350 375x36.

Since the new brake disc is thinner than the originals, it may be that the rim cannot be fitted properly because it is at the disc centering point. In such a case, we recommend simply inserting 3mm universal plates in between to compensate for this. The spacer plates are included in the set, but can also be purchased individually, see below in "Suitable accessories".

Suitable for following vehicles:

• VW T5 BUS / Transporter 
• VW T6 BUS / Transporter 

Advantages of this brake system:

• high deceleration, also in conjunction with our rear axle braking system
• thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
• directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems
• Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling

Required components:

• brake caliper: Porsche Cayenne 958 GTS Panamera , reference 7PP615149J / 7PP615150J 7PP615123 / 7PP615124 (20.A221.03) (Shaft length from the caliper must be 87mm, see yellow mark on the last picture)
• brake disc: Mercedes Benz GL - Klasse 375x36mm , reference 166 421 0912
• brake pads must be slightly shaped at the upper edge 
• pitch circle diameter 5x120 and hub bore 76,0 must be modified (service from EPYTEC for 149 € for the pair of brake discs) 
• Depending on the axle, there may be a cast edge around the axle mount. This may have to be removed with a file so that the adapter can be screwed to the axle.

Delivery:

• 2x brake caliper adapters for VW T5 and T6 bus/transporte
• high-strength mounting screws
• material certificate 
• Stress analysis / FEM calculation for entry

We supply a TÜV certificate with this adapter. In this way, the TÜV inspector can easily enter the adapter.

• Einfache TÜV Eintragung
• Qualität Made in Germany
• Faire Preise ohne Zwischenhandel, du kaufst direkt beim Hersteller und Enwickler des Produktes
• Weltweit Nr 1 in Sachen Tuning Adapter
• 15 Jahre Expertenwissen
• 10 Jahre Garantie

• Can I also use other brake discs as specified in the required components?

• No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: (Link nicht verfügbar)

• Can I also use other brake calipers as specified in the required components?

• No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the (Link nicht verfügbar) :