2950 ii Board with the newest BIOS

2x X5365 CPU's(4C @ 3Ghz all cores, no turbo) for a total of 8 cores
8x 8GB FB-DDR2 667 memory for a total of 64GB of RAM!!!
NO HDD's(Will come with 6 Blanks, I can include two 73GB Fujitsu SAS 15KRPM HDD's(MAX3073RC) if you want for no extra)
Perc 6i On the newest firmware with a GOOD battery(no warranty, batteries are consumable)

3 PCI-E Gen 1 x8 slot's
DRAC5 on newest firmware
2x Redundant Power supplies(one psu is missing the orange rubber on the release handle, still works)

DVD Drive

Complete Versa rack rails with a cable management arm and both left and right holders WITHOUT the status LED

This can be equipped with 2TB per drive max and supports Virtual disks over 2TB. This server has the maximum 64GB of ram(63.75 useable). With the max ram installed, the fans are VERY LOUD at 9Krpm. Dell says this is intentional! This does NOT have UEFI boot so booting larger disks requires some work but can be done. This server was previously heavily damaged in transit and the faceplate reflects that. Its VERY LIKELY that a bezel might not fit this server anymore, I haven't tried, see pics. The PCI-E riser can be replaced with a double PCI-X Riser. The storage controller can be upgraded to like an H700 with adapter cables(there are forum posts on how to do so). This server has hardware virtualization support but lacks SLAT support. Keep this in mind. ALL BATTERIES ARE CONSUMABLES AND CANNOT BE GUARENTEED! This server is LOUD(fans idle near 9k RPM). Do not expect to run this in a bedroom. The rear status LED nolonger works for the color Blue, It does work for orange however.

If need I can downgrade the CPU's to 5160's to reduce power draw for no extra fee reducing the corecount from 4 to 2 per processor.

If you require the low profile rack rails and cable management arm from rack solutions, I have one set. Message me before buying to see if I still have it.

Shipping this heavy monster with rails and extra parts will be very expensive. Price is set accordingly. If you are close by or plan to pickup local, message me for a discount!