|
-
【Automatic Operation】Manual clamping
paint shaker, this machine is automatic controlled by new style
alarm time-setter. When the operation time reach the set time,
it will stop automatically and alarm will sound. The machine
will stop automatically when the door is opened due to excellent
safety and features. Silent operation and added safety.
-
【High Mixing Efficiency】Max mixing
weight is 30kg (66lb); Mixing range is 0.5-20L(0.13-5.28GAL) and
Height range of paint can is 100-390mm(3.93-15.35in). The can is
shaking fully at high speed and the highest speed is mix the
paint in 30 mins, so highly increase its efficiency and save
time.
-
【Safety inter-lock】Mixing time can be
set from 1-15 mins; Automatically stop when time is up, and will
give out sound of “ Ding” to remind the operator; Safety
inter-lock prevent the cabinet door from being opened while the
machine is running and it will stop automatically for the door
is connected to the electric power.
-
【Application】This machine is suitable
to mix the non-volatile liquid not the food liquid. machine
should put on the firm and level place. Cut off the electricity
before maintenance and check to avoid any unexpected start
operation.
-
【Attention】Should put “MUST NOT SMOKE”
sign at the 5m place aside the machine, mustn’t use the machine
within the tindery and explosive environment. Mustn’t operate
without any paint can inside the machine. If there is any
expected voice, press the emergency bottom to stop the machine
and restart again after check and solve the malfunction.
|
|
Summarization |
Many
thanks for using our manual clamping paint shaker: this
machine is automatic controlled by new style alarm
time-setter. When the operation time of the machine reaches
the set time, it will stop automatically and the alarm will
sound. The machine will stop automatically when the door is
opened due to excellent safety and features. Silent
operation and added safety.
|
Specifiction |
Voltage |
110V/60Hz |
Power |
0.75KW |
Mixing range |
0.5-20L(0.13-5.28GAL) |
Equipment keeping environment temperature |
-20~50℃ |
Using environment, operating temperature |
-10~40℃ |
Humidity |
35%-90%(No frost) |
Operation way |
continue shake up and down |
|
|
Use notice |
1) This machine
is suitable to mix the non-volatile liquid not the food liquid.
2) This machine must connect to the earth, or will have the danger
of shocked by electricity.
3) Only the special technique worker or the people trained can do
the work of installation and operation and maintenance.
4) Suitable power: AC110V, 60Hz (Note:
the product must be 60Hz, otherwise the fuse will burn)
5) Take care of the machine surface to avoid any damage; machine
should put on the firm and level place.
6) Cut off the electricity before maintenance and check to avoid any
unexpected start operation.
7) Mustn't leave any tools or sundries inside of the machine.
8) Should assure the function complete of the machine after the
maintenance.
9) The installation environment should apply to the local
environment (published by the authority department). Don't pile the
paint can around the machine, mustn't store the tinder inside the
machine. Should cut off the power and take out the paint can after
work.
10) Should put a "MUSTN'T SMOKE" sign at the 5 meters place aside
the machine, mustn't use the machine within the tindery and
explosive environment.
11) Mustn't operate the machine without any paint can inside the
machine.
12) Max mixing weight is 30KG
13) If there is any expected voice, press the emergency bottom to
stop the machine and restart the machine again after check and solve
the malfunction.
|
Main function |
1) Mixing time
can be set from 1-15 minutes
2) Automatically stop when time is up, and will give out a sound of
" Ding" to remind the operator.
3) Safety inter-lock prevents the cabinet door from being opened
while the machine is running and it will stop automatically for the
door is connected to the electric power.
|
Key button |
|
Installation
and readjust |
(1) Basic
requirement: Firm and level concrete ground
(2) Readjust the 4 legs of the machine to make it put on the level
place.
(3) Move the machine with suitable tool to avoid overturning the
machine. |
Process and methods of using the machine |
1.First open the
packaging, take the machine out and put it on the firm and level
ground (if the ground is not level, readjust the 4 legs of machine
to make sure it will work on a level place)
2. Must take off the steel bar first to operate the machine.(Picture
A-D)
A: Turn the hand
wheel anticlockwise to raise the clamping board to the max height
which is suitable for the big can.
B: Will see a steel bar and sheath when open the clamping board.
C: Knock down the steel bar and sheath.
D: Nothing will be seen in the shaking frame.
E: Push the uphold board with hand gently, it should swing freely
F: Should take off the hand wheel from the shaking frame before
connect the machine to the electric power.
G: Insert the electric plug into the AC110V tri-case electric outlet
which should connect to the earth.
3.Open the front door and press the paint can cover firm and put it
into the machine, turn the hand wheel according to the arrow
direction to clamp firm the paint can, and then make firm the screw
deasil.
4. Close the front door and reposition the emergency button to start
the machine.
5.Turn the TIMER according to your need, and then the machine starts
to work. (The longest time can be 15 minutes)
6.Press the EMERGENCY to stop the machine in urgent (Don't forget to
reposition the EMERGENCY to restart the machine next time)
7.There is a safe guiding button at the left side of the front door,
the machine will stop when the front door is not close firm or is
open during operation.
8.When time is due, the TIMER will automatically stop the machine
with a sound of " Ding". The operator can open the front door at
this time and loosen the locknut in the direction of anticlockwise,
turn the hand-wheel according to the arrow direction , loosen the
press board and then take out of the paint can. |
Matainence |
To
assure the usual working, extend the use-life, play its
economic value greatly, should do a good daily maintenance.
Notice:
1)Only
the repair man can knock down this machine
2)Should cleanup the leak paint after use to keep the
working platform and pole clean.
3)Lubricate the pole, bearing, springs periodly, and the set
the cycle according to your need.
4)Should not use the acid liquid to clean the floor.
Should wear the industrial protecting gloves and cut off the
electricity before doing the maintenance and check. |
|
|
Item Include(154001) |
A
set of
110V Manual Clamping Paint Shaker |
Shipping &
Handling Details |
Default Shipping
Cost or Free Shipping Information:
▲ Default
shipping cost or free shipping service is only for the
lower 48 United States by UPS Ground or USPS. Other
areas or needs other shipping ways, please contact us.
▲ Buyers
from Guam, Puerto Rico, Virgin Islands, American Samoa,
Alaska, Hawaii, PO Boxes, APO/FPO addresses or other
countries/areas, there WILL be extra shipping costs,
please contact us for more detailed information.
▲ Please
make sure your address is valid for both UPS and USPS
services. Any costs incurred because of incorrect or
undeliverable address should be undertaken by buyer.
Handling Time: Shipping
is usually made in 1-3 business days after payments
cleared. Orders are processed from Monday-Friday; Not on
the weekends & public holidays.
Sales tax /
Customs duties: Any
sales taxes or Customs duties are not included. If came
out, they must be undertaken by the buyer. Sales Tax of
8% will be applied for orders shipped within the state
of California.
Damage In
Shipping: Email
or call us First! We will work with you to get the case
resolved in the fastest method. |
Return
/ Refund |
If you are not 100% happy with your purchase, please
contact Us. Please don't directly opened a request or
case without informing us, or else, we will do some
discounts on the warranty and other sales-services later
on. Hope for your understanding.
Returns & Exchanges
▲ All returns must
be made within 14 days of delivery date. Items must be
in new, unused condition, with all original materials
included with the shipment. A partial refund may be
applied for opened or damaged items, depending on the
condition.
▲ Items returned under the buyer’s remorse: The
return shipping fee must be covered by the buyer; The
original shipping cost will also be deducted from the
refund. 15% restocking fee of the items purchase price
will be charged.
▲ Returns
that are the result of our seller's error: Buyer will
receive a full refund of the item as well as shipping
charges
▲ All
returns require a RA (Return Authorization) number that
will be given by our seller. Please contact with us at
first for more details.
Defective & Damaged
Products
▲ If
product was received damaged or not as described, please
send us some pictures or videos, so we could well
understand your problem, then solve them for you ASAP.
Besides, it's much helpful for us to claim with UPS,
remind our related department to pay much more attention
to packaging later on. Hope for your understanding.
▲ Replacement
or refund of defective or damaged products can only be
returned in exchange for the exact same product, or
else, the purchase price will be refunded back to your
original payment method.
▲ If
an item is received damaged, customer service must be
contacted within 7 days of receiving your item. All
returns require a RA (Return Authorization) number as
above. |
Payment |
eCheck Issues: Payments
via eCheck do not clear immediately. Usually you will
wait 5-7 days after checkout for it to clear. Then
we will arrange shipments for you.
|
Warranty & Feedback |
▲ 6
months' warranty for the machines, not for the
consumables. We stand behind our products all the item,
so even if your warranty period has expired, you can
still seek for service or technical support from us with
low cost.
▲ Any
warranty shipping cost to us is responsible by buyer.
▲ Any
shipping cost to buyer is responsible by the seller.
▲ We
committee to the customer satisfaction and want to bring
you the best purchase experience. If there is any
problems, please contact us ASAP. If not, please leave
us a positive feedback as it's very important for us.
Thanks very much. |
|