Phoenix Gold Z1502i 150W 2 Channel Amplifier

The compact amplifiers of the Z series are equipped with a modern high-end class A/B chipset and powerful unregulated power supplies. The reliable setting of the optimum frequency is carried out using the high-quality potentiometer. The solid connection terminal is evidence of the solid construction of the Z amplifiers and thanks to the coordinated hardware, the amplifiers are absolutely convincing in their “sound”.

The Z-Series amplifiers have been specially designed to be easily and directly integrated into the vehicle to amplify the sound system. In particular, the combination of the high-level inputs (optional) with the auto-turn-on function allows the original factory sound system to be significantly amplified and equipped with even better speakers. And should you nevertheless decide on a radio retrofit device from a well-known manufacturer, the adjustable input voltage will help you to optimally integrate it into the vehicle.

So no matter whether you want to keep the factory radio, install a new radio or even change the car, the amplifiers of the Z series always ensure better performance at an excellent price-performance ratio.

All features at a glance

• 

  High-end class A/B chipset

  With the Z1502i , all channels are designed in class A/B technology.

• 

  Powerful unregulated power supplies

  The unregulated Phoenix Gold power supplies ensure the amps have dynamic reserves and enable stable operation even with 4 & 2 ohm impedances.

• 

  6dB high/low pass crossovers

  All crossovers of the Z series amplifiers are equipped with high-quality potentiometers and allow reliable frequency adjustment.

• 

  Surface mount component technology

  High-quality circuit board for professional SMT assembly, in which each component is computer-controlled tested before it is attached.

• 

  “High Level” inputs for easy upgrading of all systems

  The low-level cinch inputs also allow "high-level". If a high level signal is used, the amplifier will start automatically without a remote signal.

• 

  Intelligent automatic switch-on (Auto Turn On)

  Auto-On is useful if your factory sound system does not provide a remote line to activate the amplifier. If you connect the amplifier directly to the high-level input signal of the system, this can activate the amplifier based on the input voltage.

• 

  Intelligent 4-way protection circuit & integrated fan system

  The intelligent 4-fold protective circuit and the integrated fan system work together optimally to ensure better reliability and more performance in the demanding vehicle environment. The sophisticated protective circuit protects the amplifier during operation against:

  • thermal overload
  • polarity reversal
  • short circuit
  • low voltage

• 

  Solid terminal block terminal

  Massive terminal block for up to 25mm² power and ground cables supply the amplifiers with the required current without contact resistance. The +12V terminal is connected directly to the battery using a 25mm² cable - a fuse max. 30cm after the battery terminal is mandatory. The remote input is controlled with the switched +12V of the head unit and GROUND is best connected to a central, well-conducting ground point on the body.

• 

  Our connection recommendation

  Due to the current levels that occur, the following configuration is recommended for the Z amplifiers:
  - Current: 4 gauge (25mm²)
  - Fuse: 30A
  - Speaker: 10 gauge (6mm ² )

  For the best possible sound quality, we recommend premium amplifier connection cable sets from the Stinger brand - suitable for this amplifier, for example the Stinger SK4641, which you can also find in our accessories.