Naim, Bang & Olufsen, Tandberg Audio Cable 5 Pin Din to 2 RCA Phono Male Plugs Aux  Adapter Lead NAIM QUAD , Length 2 Meter

This cable is used for connecting a Tape Deck players  Input & output.

AUDIOPHILE GRADE Lead using high quality audio materials and components.

Professionally handmade high quality audio leads.

Each cable is handmade and finished to a high standard using Oyaide SS- 47 Audio Grade Silver Solder for a complete professional finish. Each cable is then mechanically and electronically tested before dispatch.

PLEASE NOTE: This cable is Wired PINS 3+5 , 1+4 with a common ground. If you require another wiring configuration please advise when ordering

Connectors:

Amphenol ACPR RCA/Phono plugs with smooth Satin body are high-end, professional-grade RCA connectors. Gold plated brass contacts enhance conductivity. Insulation prevents any shorting inside. Coloured rubber grommet for long lasting strain relief.

Rean Gold plated 5 Pin Din NYS322AG


5 pole DIN cable connector, gold plated shell and contacts
Technical Information hide
Electrical
Dielectric strength 0.5 kVdc
Insulation resistance ≥ 1 GΩ
Rated current - depends on mated connector
Contact resistance - depends on mated connector
Mechanical
Cable O.D. - 5 mm
Lifetime > 1000 mating cycles
Wiresize - 26 AWG
Material
Insulation
Thermoplastic
Strain relief
crimp type Zn plated
Environmental
Temperature range -25 °C to +70 °C

Soldered Terminations:

Oyaide SS-47 Audio Grade Silver Solder

The SS-47, the Oyaide original hi-fidelity solder, is produced in order to maximize the capacity of cables and connecters by eliminating its sound character.

After the careful consideration of the importance of the contact and joining area, Oyaide finally achieved to produce the high-fidelity audio specialized solder

They have tried to improve the quality by always selecting best material . There is no exception about this audio grade solder, SS-47. Compared to general solders which usually contain 3N (99.9%) pure tin, SS-47 contains 4N (99.993%) pure tin achieved by excluding impurities to the maximum

Furthermore, 4.7% silver and 1.7% copper are contained for the purpose of improvement of electric conductivity and durability.

Cable:

Van Damme Pro Grade Classic XKE Cable,  is a relatively low capacitance unbalanced audio cable for use with unbalanced output devices. Its tight construction and dual screens of conductive thermoplastic and close lapped copper ensure noise free handling and excellent noise rejection making this cable ideal for audiophile connections and studio use.

These cables are used in many professional audio systems and in recording and mastering studios worldwide. Van Damme is the industry standard in sound production, television, film and radio studios as well as live broadcasts and music performances.

Specification

Conductors3 x 0.20 mm bare silver plated oxygen-free copper

4 x 0.20 mm bare ultra-pure oxygen-free copper
Conductor size7 x 0.20 mm, 0.22 mm2, AWG 24/7
InsulationFoamed polyethylene
Screen 10.40 mm conductive thermoplastic
Screen 280 x 0.10 mm close lap spiral bare oxygen-free copper
Jacket materialFlexible PVC/Neoprene composite
Overall diameter6.00 ± 0.15 mm
Bend radius10 x overall diameter

ResistanceConductor< 90 Ohm/km

Insulation> 5000 MOhm/km
CapacitanceCore to screen< 90 pF/m

Sommer’s Onyx 2025 Twin cable


TECHNICAL DATA

Jacket, outer dimension PVC - 4,8 x 9,2 mm

Construction - LI2YDY2x0,25mm2

AWG – 24

No. of inner conductors - 2 x 1 x 0,25 mm2

Copper strand per conductor - 32 x 0,10 mm

Conductor insulation – PE

Shielding - Copper spiral shielding

Shielding factor - 90 %

Temperature range - min. -25 °C

Temperature range - max. 70 °C

Fire load per m - 0,23 kWh

Weight per 1 m - 35g

Packaging - 100 m roll

Colour - Black or Blue

ELECTRICAL DATA

Capac. cond./shield. per 1 m - 120 pF

Cond. resistance per 1 km - 115 Ohm

Insulation resist. per 1 km - > 1 GOhm