Siehe Bild 

5 wire USB Touch Controller PCB , Touch Kit driver compatible


Touch Driver  / Treiber Link
http://www.fancyview.com/?c=list&cs=touch_driver
 
Datasheet /  Datenblatt des Herstellers siehe unten (5-wire ) 


http://www.fancyview.com/?c=msg&id=355 


 Hardware Specifications  Software Features 
 Power Requirements +5VDC CalibrationFast 4 points position 
 Operating Temperature 0°C to 65°C CompensatAccuracy 25 points linearity compensation
 Storage Temperature -40°C to 80°C Draw Test Position and linearity verification
 Relative Humidity10% to 90% RH, non-condensing Controller Setting

 1. Support multiple controllers

2. Dynamical add/ remove controllers

3. Change controller interface without reboot

 Protoca

 1.RS232 Model: 9600 bauds, none parity,8 data bits, 1stop bit

2.USB Model: USB 1.1 low speed

3.PS/2 Model: PS/2 mouse

 Languages Support 11 languages for Windows
 Resolution 2048 x 2048 Mouse Emulator

 1. Right / left button emulation

2. Click / drawing mode

 Accuracy Tolerance Max. +/- 5% tolerace Sound Notification

 1. No sound

2. Touch down

3. Touch up

 Reporte Rate

 1.RS232 Model: Max. 160points/sec

2.USB Model: Max. 160points/sec

3.PS/2 Model: Max. 140points/sec

 Double Click

 1. Configurable double click speed

2. Configurable double click area

 Response Time Max. 35ms COM Port Support

 1. Support COM1 ~ COM255 for Windows and Linux

2. Support COM1 ~ COM8 for DOS

 Pin out definition

 1. 4 wire model: X+, Y+, X-, Y-

2. 5 wire model: UL, UR, COM, LR, LL

3.5 wire model: UL, UR, COM, LL, LR

 Display Support

 1. Support monitor/ display rotation

2. Support multiple monitors

3. Support split monitor

 Panel Resistance

 1. 4 wire model: 200~900 ohm

(Pin to pin the same layer)

2.  5 wire model: 50~200 ohm

(Pin to pin the same layer, touch resistance under 2Kohm)

 OS Support

 1. Windows Vista / XP / 2000 / XP Sever 2003

2. Windows 95 / 98 / ME / NT4 / XP Tablet PC edition

3. Windows CE 2.12 / 3.0 / .net ( 4.0 , 5.0  )

4. Linux (up to Kernel 2.6)

5. MS-DOS: support display resolution: 320x200, 640x200,

640x350, 640x480, 800x600, 1024x768 and 1280x1024

The 5 Wire Touchscreen connector, J1 Connector lower row, and signal descriptions Signal name J1 pin Signal function UL 1 Connect to 5 Wire touchscreen UL UR 2 Connect to 5 Wire touchscreen URCOM( WIPER) 3 Connect to 5 Wire touchscreen WIPER LR 4 Connect to 5 Wire touchscreen LR LL 5 Connect to 5 Wire touchscreen LL Signal definition for USB interface Signal name J2 Connector pin Signal function D- 5 USB bus signal D+ 4 USB bus signal SG 3 signal ground - POWER 2 +5V power drain from host side. SG 1 signal ground