Bühler motor with planetary gear

1.61.117.033

Voltage: 12V DC 60Ncm
Speed: 50 rpm

Total length 95mm
Length without bearings: 80mm

Diameter (at the motor part) : 22.5mm

Diameter (on the gear part) : 22mm

Axle (d) : 4mm with flat
Axis (L) : 9mm


Construction of gearbox housing: plastic
Collector: copper / 3 parts
basic interference suppression
Degree of protection: IP 20
Commutation: carbon brushes
Anchor: straight groove
Magnet system: permanent magnets,
2 pin
Motor bearings: 2 oil-soaked sintered bronze bearings
Motor housing: steel, protected against corrosion
Motor end shields: plastic on the collector side, die-cast zinc on the drive side
Planetary gears: Plastic gears
Service life**: up to 600 h
Weight: 95g

Planetary gears are characterized by a long service life and low running noise with high torque.


Bühler motor with planetary gear Voltage: 12V DC 60Ncm Speed: 50 rpm Total length 95mm Length without bearings: 80mm Diameter (at the motor part) : 22.5mm Diameter (on the gear part) : 22mm Axle (d) : 4mm with flat Axis (L) : 9mm Construction of gearbox housing: plastic Collector: copper / 3 parts basic interference suppression Degree of protection: IP 20 Commutation: carbon brushes Anchor: straight groove Magnet system: permanent magnets, Motor bearings: 2 oil-soaked sintered bronze bearings Motor housing: steel, protected against corrosion Motor end shields: plastic on the collector side, die-cast zinc on the drive side Planetary gears: Plastic gears Service life**: up to 600 h Weight: 95g Planetary gears are characterized by a long service life and low running noise with h