Payment:
You must pay for your item within 4 calendar days.
Please contact us if something comes up. We will gladly work with you to figure out a solution best for both parties.
Please contact us through eBay's messaging system with any questions or concerns.
Shipping:
All items are shipped FedEx or USPS, unless otherwise noted and at our discretion. Insurance is included in the shipping price. Items valued at over $750 will require a signature. No exceptions.
Please note some lighter items may be shipped out using USPS First Class. Items are shipped in a timely manner (usually 1-2 business days). Tracking numbers are sent out when the item is shipped. You will get an email from eBay to the provided email address.
You can access your tracking info at any time in your My eBay page. Please check spam filters before contacting us about where your tracking number is.
Please contact us through eBay's messaging system with any questions or concerns.
==============================================================================
SixPakPlus (Type 1) AST Part Number 201177-001
The SixPakPlus is a multi-function Memory Expansion board designed for the IBM
PC and XT and 100% compatibles running at 4.77 MHz. In it's standard
configuration, it comes with anywhere between 64K and 384K of RAM using
industry standard 64K dynamic RAM chips, a Clock/Calendar a Serial Port
configurable as COM1: or COM2: and a Parallel Port configurable as LPT1 or
LPT2. All memory installed on the SixPakPlus is designed to expand your PC to
it's 640K maximum. It does not support extended or EMS/EEMS type memory. In
addition to the basic configuration, it can be configured with a Game Port.
Note that the memory chip speed must be 200 nsec.
Please Refer to Tech Bulletin #0004 for more information on the Memory Chips.
SWITCH SETTINGS
STARTING ADDRESS MEMORY INSTALLED ON 6-PAK
SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8
--- --- --- --- --- --- --- ---
64K OFF OFF OFF 0K OFF OFF OFF N/A P
128K OFF OFF ON 64K OFF OFF ON N/A A
192K OFF ON OFF 128K OFF ON OFF N/A R
256K OFF ON ON 192K OFF ON ON N/A I
320K ON OFF OFF 256K ON OFF OFF N/A T
384K ON OFF ON 320K ON OFF ON N/A Y
448K ON ON OFF 384K ON ON OFF N/A
512K ON ON ON
SW7 - PARITY ENABLE (Recommended "ON" at all times)
SW8 - NOT USED
JUMPER SETTINGS
PORT ENABLE JUMPER BLOCK: (Reading from Left to Right)
1 - Installed to Enable Serial Port as COM1: (3F8)
2 - Installed to Enable Serial Port as COM2: (2F8)
3 - Installed to Enable Parallel Port as LPT1:
4 - Installed to Enable Parallel Port as LPT2:
5 - Installed to Enable Game Port (201)
6 - Installed to Enable Clock/Calendar (2C0)
IRQ ENABLE JUMPER BLOCK:
3S - IRQ 3; Installed if COM1: is Enabled
43 - IRQ 3; Installed if COM2: is Enabled
4 - N/A; Leave open
5 - N/A; Leave open
7 - N/A; Leave open
2 - N/A; Leave open
IRQ-7 ENABLE JUMPER BLOCK:
Should be installed if the Parallel Port is LPT1
RS232 JUMPER SETTINGS
The RS232 configuration block is made up of three sets of three pins each.
Their function is to minimize the need for making special I/O cables for
some unique serial devices. The normal setting in nearly all cases is to
install three jumpers connecting the middle and left pin in each row. In
rare instances, a device may require that the CTS, DSR, or DCD signals be
forced true. In these cases, move the corresponding jumper to connect the
center and right pin.
JUMPER AND SWITCH LOCATION
.---------------------------------------------------------------. .---
| |=|
| BATT RS232 * | |
| JUMPER * | |
| SW-1 BLOCK * | |
| +---------+ | |
| | S1 S8 | | |
| +---------+ | |
| | |
| PORT ENABLE ****** * IRQ JUMPER | |
| JUMPER BLOCK IRQ7 ****** |=|
`---------------------------------------------. .----ï |
`------------ï |
|
==============================================================================
SixPakPlus (Type 2) AST Part Number 201177-002
SixPakPlus (Type 3) AST Part Number 201177-003
The SixPakPlus is a multi-function memory expansion board designed for use
with the IBM PC, XT, and 100% compatibles running at 4.77 MHz. In it's
standard cofiguration, it comes with anywhere between 64K and 384K of RAM
using industry standard 64K dynamic RAM chips; a Clock/Calander; a Serial Port
configurable as COM1: or COM2:; and a Parallel Port configurable as LPT1: or
LPT2:. All memory installed on the SixPakPlus is designed to expand a PC to
it's 640K maximum. It does not support Extended or EMS/EEMS type memory.
There is an option available for adding a Game Port.
SWITCH SETTINGS
STARTING ADDRESS MEMORY INSTALLED ON 6-PAK
SW1 SW2 SW3 SW4 SW5 SW6
--- --- --- --- --- ---
64K OFF OFF OFF 0K OFF OFF OFF
128K OFF OFF ON 64K OFF OFF ON
192K OFF ON OFF 128K OFF ON OFF
256K* OFF ON ON 192K OFF ON ON
320K ON OFF OFF 256K ON OFF OFF
384K ON OFF ON 320K ON OFF ON
448K ON ON OFF 384K* ON ON OFF
512K ON ON ON
* = FACTORY DEFAULT
SW7 - NOT APPLICABLE
SW8 - PARITY ENABLE (Recommened ON at all times)
JUMPER SETTINGS
PORT ENABLE JUMPER BLOCK (Reading from Left to Right)
1) Installed to Enable Serial Port as COM1: (3F8)
2) Installed to Enable Serial Port as COM2: (2F8)
3) Installed to Enable Parallel Port as LPT1:
4) Installed to Enable Parallel Port as LPT2:
5) Installed to Enable Game Port (201)
6) Installed to Enable Clock/Calendar (2C0)
IRQ JUMPER BLOCK
The IRQ block consists of three pairs of pins, labeled 3,4,7.
Install a jumper at "3" if the Serial Port is configured as COM2,
or at "4" if it is configured as COM1. Install a jumper at "7"
if the Parallel Port is configured as LPT1.
RS-232 JUMPER BLOCK
RS-232 configuration block is made up of six pairs of jumpers labeled 1-6.
Their function is to minimize the need for making special I/O cables for
some unique serial devices. The normal setting in nearly all cases is to
install three jumpers on the even numbered options (2,4,&6). In rare
instances, a device may require that the CTS, DSR, or DCD signals be
forced true. In these cases, move the corresponding jumpers as follows:
Move "2" to "1" to force True CTS
Move "4" to "3" to force True DSR
Move "6" to "5" to force True DCD
SWITCH AND JUMPER LOCATIONS
.---------------------------------------------------------------. .---
| RS232 |=|
| JUMPER BLOCK | |
| ****** | |
| SW-1 | |
| +---------+ | |
| | S1 S8 | | |
| BATT +---------+ | |
| | |
| PORT ENABLE ****** IRQ JUMPER | |
| JUMPER BLOCK *** |=|
`---------------------------------------------. .----ï |
`------------ï |
|
==============================================================================
SixPakPlus (Type 4) AST Part Number 201177-004
The SixPakPlus is a multi-function memory expansion board designed for use
with the IBM PC, XT, and 100% compatibles running at 4.77 MHz. In it's
standard configuration, it comes with anywhere between 64K and 384K of RAM
using industry standard 64K and/or 256K dynamic RAM chips; a Clock/Calander; a
Serial Port configurable as COM1: or COM2:; and a Parallel Port configurable
as LPT1: or LPT2:. All memory installed on the SixPakPlus is designed to
expand a PC to it's 640K maximum. It does not support Extended or EMS/EEMS
type memory. There is an option available for adding a Game Port.
SWITCH SETTINGS
STARTING ADDRESS (Memory in system before 6PAK installed)
S1 S2 S3
--- --- ---
64K OFF OFF OFF
128K OFF OFF ON
192K OFF ON OFF
256K* OFF ON ON
320K ON OFF OFF
384K ON OFF ON
448K ON ON OFF
512K ON ON ON
* = factory default
MEMORY INSTALLED ON 6-PAK
S4 S5 S6 BANK 0 BANK 1 BANK 2
--- --- --- ------ ------ ------
0K OFF OFF OFF - - -
64K OFF OFF ON 64K - -
128K OFF ON OFF 64K 64K -
256K OFF ON ON 256K - -
320K ON OFF OFF 64K 256K -
384K* ON OFF ON 64K 64K 256K
512K ON ON OFF 256K 256K -
576K ON ON ON 64K 256K 256K
S7 - Not Applicable
S8 - Parity Enable (Recommend On at all Times)
JUMPER SETTINGS
PORT ENABLE JUMPER BLOCK (Reading from Left to Right)
1) Installed to Enable Serial as COM1: * (3F8)
2) Installed to Enable Serial as COM2: (2F8)
3) Installed to Enable Parallel as LPT1: *
4) Installed to Enable Parallel as LPT2:
5) Installed to Enable Game Port (201)
6) Installed to Enable Clock/Calendar * (2C0)
IRQ ENABLE JUMPER BLOCK
IRQ 3 - Installed if COM2: is Enabled
IRQ 4 - Installed if COM1: is Enabled
IRQ 7 - Should be installed if Parallel Port is LPT1: *
RS-232C JUMPER BLOCK
RS-232 configuration block is made up of six pairs of jumpers. Their
function is to minimize the need for making special I/O cables for some
unique serial devices. The normal setting is to install three jumpers on
the "two" positions, allowing normal RS-232 operation. In rare instances,
a device may require that the CTS, DSR, or DCD signals be forced true. In
these cases, move the corresponding jumpers to the "one" position.
SWITCH AND JUMPER LOCATIONS
.------------------------------------------------.
| | .---
| BATT |=|
| ****** PORT ENABLE RS * | |
| JUMPER BLOCK 232 * | |
| BLOCK * | |
| | |
| IRQ JUMPER BLOCK *** | |
| +-------+ | |
| | 1 - 8 | SW1 | |
| +-------+ |=|
`------------------------------. .----ï |
`------------ï |
|
==============================================================================