Here at MadMopeds we only supply parts that we use on our own bikes and our customers bikes in our workshop so you can be assured of them being of good quality.

These impossible to find fuel tap filters are for early Suzuki vacuum operated fuel taps as fitted to the following bikes...

* GT250 K, L, M and some early A models

* TS250X 1986

Using the original fuel tap part numbers

44300-18450 and 44300-15151

PLEASE DO NOT BUY THESE UNLESS YOU HAVE AN ORIGINAL TYPE TAP AND HAVE MEASURED YOUR SIZES. THESE DO NOT FIT THE REPLICAS.

Message us for replica filters as we have those too.

FOR OWNERS OF THESE BIKES...

* T250

* T305

* T350

* T500

For the years 1968 to 1975 T500, T350, T250, T305 read below carefully please

PLEASE CHECK OUT AND MEASURE ACCURATELY THE SIZE OF THE HOLE IN THE CASTING AS SOME TAPS USE A LARGER FILTER AND THE LATER GT TAP MAY HAVE BEEN FITTED TO YOUR TANK.

We have another listing set up for taps requiring a larger casting filter 😊

These filters are the best available and are suitable for the brass petrol pipe on the original OEM vacuum type petrol taps.

You are buying 2 two filters to suit both the brass tube and the casting

* 6.0 mm brass tube

* 6.3 mm casting

PLEASE NOTE..

Please check your sizes and let us know if you need a different size for your casting.

NOTE... Some T500, T350, T305 AND T250 taps need a larger filter for the casting so please check before purchase. We have another listing for the taps requiring the larger casting filter.

We have done our homework on these and they will not be too big or need to be glued on or in 😅 like others that may be available elsewhere.

These ones are a good tight fit on the tube and inside the casting.

Warm the plastic up with your fingers or with hot water to push these push on .

DO NOT use heat guns on these filters.

Note --- We also have filters in other sizes for other taps too. Please message us with the size of the hole in your casting and the brass tube (measure very accurately please with calipers)

We also sell excellent quality non vacuum replacement petrol taps for all of the models listed above should you not be able to find all the spare parts required to refurbish your OEM Tap

We can also supply you with the best quality heavy wall thickness fuel pipe and stainless steel clips to suit your OEM or new tap. Our pipe is E5 and E10 petrol resistant so please see our other listings if you need some.

Dispatched using 2nd Class large letter postage. If you need it faster please select the 1st class postage option for £1 extra.

MadMopeds UK