Zebra GX430t Wireless Network Thermal Label Printer with Power supply, ribbon and USB Cable. Roll of 250 4x6" delivery labels included.

In good working condition.

300dpi print quality.

First of all please download and install ZDesigner driver from Zebra website. Then connect printer to PC via USB Cable and allow Windows to install it. Right click on printer in Control Panel- Options- set your label size and click Apply- Tools- Run Calibration-Send. Printer will be ready to work via USB cable.

To configure wireless printer please install and run Zebra Setup Utility- Configure Printer Connectivity- Wireless- Static-Hostname (give name to your printer)- IP Address (192.168.1.xxx – Assign available IP address between 2 and 254) –Subnet Mask (255.255.255.0) –Default Gateway (192.168.1.254) All addresses provided are for Home Network. It should be runing on 2.4 GHz. (You can check them by running command: ipconfig /all ) . If you on corporate network- consult your network administrator. – Next page ESSID: type in your router name (Case sensitive)– Choose security mode of your network -Next-tick String in WPA Settings and type in your router password in PSK Name –Next-Finish. Settings will be sent to printer. It will reset and if everything gone well you should see IP Address on screen and Signal strength percentage.

Next step is to install printer in your PC. Zebra Setup Utilities- Install New Printer-Install Printer-Choose GX430t from the list- Next- Add new Printer- Add Port- give a name to printer-Type IP Address you assigned for printer- Port number will be assigned by computer-OK-Choose created port from the list-Finish. Printer driver will be installed and new printer icon will appear in Control panel.

If you need express delivery- please choose this delivery option from drop down menu when paying for the item.

For installation instructions on a Mac please watch this video on Youtube:

https://www.youtube.com/watch?v=t2Nx44xWhU4&t=1s