Number of outputs

1

Nominal Mains Supply Voltage

100-120V 60Hz USA and Au / EU 230 – 240V AC 50Hz

AC voltage range

90-120V AC 60Hz version/ 190-264V AC 50Hz version.

Mains Frequency Range(s)

47 – 53 Hz /60Hz

Electrical Isolation

  0-10V or 0-20V. This input has no optical isolation from main

Control Dimmer

0/1-10V (0-20V) DC: 12V P.W.M: 1-10V POT. or 500K potentiometer 

Load Brightness Control Range

1% to 98% (2-5%-98% for typical Quality LEDs load)*

Minimum Load

10-25W* (TE) & 5W (LE)

Load Rating

  4A max at 240V AC (continuous work for 7 days)

Mains Terminals

2 x 4-6 mm2    screw terminals

0/1-10V Terminals

2 x 4-6 mm2    screw terminals

Weight

~450g

Operating Temp. Range:

0 – 50⁰C

40 ºC to +50 ºC for output current ≤6.3A max

0 ºC to +40 ºC for output current >7.6A max

Max. casing temperature Tc

80 ºC

Operating Humidity Range

10% - 90% RH non condensing

Thermal Protection

NTC temperature limit is set to:

Normal

125 °C

Heavy Duty Model

135 °C

Housing Material type

Polycarbonate (UL94-HB)

IP Rating

IP60

Dim Device Type

LE- Leading Edge: TE- Trailing Edge

Safety Compliance

 LVD 2014/35/UE , EMC 2014/30/UE, AS/NZS 3100:2017 VDE

Life Time

Up to 100000 h

Dimensions L x W x H (mm)

 90 x 115 x 55

Note:

1. All parameters measured at 240V AC input, rated current and 25°C ambient temperature.

2. A driver is considered a component that will be operated in conjunction with final equipment such as (LED driver), if drivers are of poor quality it may interfere with proper operation.

3. The lights connected to the dimmer must not exceed 7.6A, the read value of the light, not the current voltage read by the measuring instrument, because the dimmer reduces the current / power to maintain green energy, otherwise the reading will be false and may damage the dimmer.