300D Meter with STDO11 Galvanic DO Electrode, and STTEMP30 Temperature Electrode
Starter 300D provides accurate and reliable dissolved oxygen measurement that is critical to aquatic life and water quality.
- Each time the meter is calibrated, icons appear on the display to confirm the accuracy of the calibration process so you can ensure accurate measurement
- Push-button toggling between ppm, mg/L and percentage
- The galvanic electrode can be used immediately after being powered on
- without the wait time typically associated with dissolved oxygen meters
- Measurement Range: 0.0 to 199.9%; 200 to 400% 0.00 to 19.99; 20.0 to 45.0 mg/L 0.00 to 19.99; 20.0 to 45.0 ppm 0 to 50 °C
- Measurement Resolution: 0.1%; 1% 0.1 mg/L; 1mg/L 0.01 ppm; 0.1 ppm 0.1 °C
- Barometric Range: 375 to 825 mmHg 500 to 1100 mbar 500 to 1100 hPa
- Barometric Resolution: 1 mmHg 1 mbar 1 hPa
- Error Limits: ± 1% ; ± 0.3 °C
- Calibration: 1 or 2 Points 100% and 0%
- Memory: 30 Measurements Last Calibration Data
- Power Supply: 4 AAA > 250 Operating Hours
- Size/Weight: Approximately 90 W × 150 D x 35 H mm / 0.18 kg (Without Batteries)
- Display: Liquid Crystal
- Input: BNC, Cinch, NTC 30 kΩ
- Temperature Compensation: ATC & MTC
- Salinity Compensation: 0.0 to 50.0 ppt
- IP Protection: IP54
- Housing: ABS