Here at MadMopeds we don't just sell spares. We use these on our own bikes plus our customers machines so we know that we can sell all our parts with confidence!

This will fit your classic Honda....

USUALLY USA VERSIONS

* CB400F Super Sport - 1975-1976

* CB500T - 1975-1976

* CB550F Super Sport - 1975-1976

* CB550K - 1975-1976-1977

* CB750F Super Sport - 1975-1976

* CB750K - 1975-1976-1977

* CB750 -  USA

OEM part numbers..

16950-393-015

16950-393-005

With 20mm x 1.5 mm pitch threads. This next section is very important so please READ it carefully.

Please DO NOT BUY THIS TAP WITHOUT READING BELOW. DO NOT ASSUME THAT THIS TAP FITS YOUR TANK.

Sourcing the correct non original fuel tap for some Honda bikes is very difficult. Honda used several different thread sizes and rates. Even changing mid year and with USA and F2 versions being different.

So to avoid any errors we would like you to check your thread rate BEFORE you buy a tap from us. Obtain help if needed please.

We sell thousands of taps and usually they don't need all of this attention!

This tap has a 20mm thread and a thread pitch of 1.5 mm

That means that the outside diameter of the thread on the tank stub is 20mm and the threads are spaced 1.5 mm apart.

We have found that most of the four cylinder bikes used a finer thread than this with a pitch of 1.0 mm

WE SELL TAPS FOR THOSE TOO.

Because we look at petrol tap threads all day we can see the difference but it's not easy so please do this to determine your thread pitch..

1) Using a steel rule or vernier calipers, first measure the width of the tank stub to check that it's 20mm. Do not measure inside your tap thread.

2) Then hold your steel rule up to your tank stub and over a distance of 12mm count the number of crests or peaks that you can see on the threads...

If you can see 8 threads .... Hurry up and buy this tap, they are in very very short supply 😁

If you can see 12 threads then please see our other listing for 20 x 1.0 mm Honda taps

Sorry for the short lesson but it'll be worth the time, trust us! We don't want you to buy the wrong one and then have to deal with errors and returns 😊

If you require a 16mm or 18mm tap then we do have those in stock too and they won't be such a problem.

This is a brand new reproduced fuel tap and it has the following settings... ON, OFF, RESERVE.

MadMopeds are a genuine UK seller with UK stock!

Check out our fantastic feedback, we can get this to you usually within 3 or 4 days as we post daily but if you want it quickly then you can select 1st class for only £2 extra on purchase.

Note that our tap has the fuel outlet on the right hand side.

The casting of our taps is superb and they are all checked for smooth operation before dispatch.

Please take a good look at the pictures of my taps and see if you can find better castings elsewhere!

OK so this tap is not original Honda but it is a much cheaper alternative than trying to get an original one. They're just not available anywhere.

20mm threaded taps are even rarer than your bikes! 😁

Our taps are as good as you are going to buy, we have searched high and low for a very5long time for taps for these bikes that are just right and these are the best!

To date, we have had no returns or issues with my supplier and manufacturer.

Fitting this will eradicate all the usual problems of old taps not working and fuel not flowing or leaking taps.

Technical specifications:

These taps are very well made with very good casting material and tolerances, they are not made from 'monkey metal' like lots of other cheap taps are. I've bought them!... and binned them!

This will be a direct fit on your bike but you may want to renew your fuel pipe.

Connection to fuel line: 6 mm internal diameter fuel pipe.

We sell very good quality clear or green tinted heavy wall thickness 6mm fuel pipe that is E5 and E10 resistant and suits this tap too if you need it. See our other listings in our eBay store

Our taps are supplied with a tank seal and we wouldn't recommend removing this tap once it's fitted and sealed so we recommend that you fit an inline fuel filter too.

We can also supply that.

Dispatched with 2nd Class parcel postage or 1st class for an extra £2. Please make your selection on purchase.

MadMopeds