For Mercedes GLC Coupe C253 (2015-2020),Mercedes GLC SUV X253 (2016-2020) Passenger Seat Occupancy Mat Emulator
Compatible with a 3-wired connector (colors: red, white, brown or black, brown, blue) and following models:
Our emulator works only with the seat mat sensor part numbers:
A 213 870 00 10
A 222 820 52 03
A 000 820 82 05
A 117 870 01 10
Compatible with a 3-wired connector. For European and US cars and following models:
Mercedes GLC Coupe C253 (2015-2020)
Mercedes GLC SUV X253 (2016-2020)
How to check if you have a WSS seat mat in your car?
Please, visit www.lastvin.com and enter the VIN number and scroll down thru the codes.
Look for SA Code: U10 FRONT PASSENGER SEAT WITH WEIGHT SENSING.
I have U10 code. How do I check the passenger mat number?
Please see this link:
Look under the passenger seat and locate small black box with the white sticker near the yellow seat mat connector.
Once you have that part number you can compare it with the part numbers listed above. If you car does not have U10 code then please send us a VIN number and we will try to help you choose the right emulator.
If you are unsure, please send us a VIN number and we will try to help you choose the right emulator.
What you get:
1 x 2in1 small design Seat Occupancy Mat Sensor Emulator CE and RoHS compliant
1 x seat belt emulator with original plug
1 x Installation Instructions
DESCRIPTION
THE WSS SEAT OCCUPANCY MAT IS A SENSOR MOUNTED IN THE FRONT PASSENGER SEAT. THE OTHER NAMES OF THE WSS SEAT MAT SENSOR ARE: "WEIGHT SENSING SYSTEM" OR "SA CODE: U10" OR "FRONT PASSENGER SEAT WITH WEIGHT SENSING".
The emulator simulates that the seat occupancy sensor (seat mat) works correctly and that the seat is always occupied. It sends the same signal to an airbag control unit as that sent by seat mat while a passenger is sitting.
The emulator simulates a person sitting in the passenger seat with a seat belt fastened. To make the emulator works you need a diagnostic tool (like the latest models of Autel, Bosch, iCarsoft etc.) to remove old errors of a defective passenger mat stored in the airbag control unit. Once you connect the emulator your diagnostic tool will be able to remove the old errors and turn off the SRS/airbag warning. Unfortunately, the errors related to the safety systems cannot be removed automatically. This emulator is a diagnostic device to test if car installation is working correctly and that the error displayed on the dashboard are caused by faulty seat occupancy sensor.
* PLEASE MAKE SURE YOU HAVE THE SAME PLUG
