Explorer Everest 500/600 ATV snow plow complete set with hydraulic side adjustment with 132cm width and 5-way side adjustment in black!
Kit complete with lifetime warranty!

The large, complete snow plow / sideshift winter package Big especially for your Explorer Everest 500/600 ATV.
Perfect for commercial, professional use in municipalities, caretaker services, commercial yards, pathways and others.
Perfect kit for quick and daily use in winter or gardening!

You will receive a complete snow plow with mounting frame. Complete kit designed for the Explorer Trasher Everest 500/600.
You don't need anything other than a winch to have the blade and lower it!

Snow blade with a width of 132cm (52 ​​inches) in professional design for extreme loads, high snow or wet, heavy snow.

Large winter package to start immediately with a snow blade 132cm wide (52 inches).

Complete winter package SET with special mounting frame/drawbar, Allen assembly and attachment parts and extra thick scraper bar suitable for your Explorer Everest 500/600 ATV.

This Plastic sign is as stable as that Steel signs, but much lighter, easier to handle and doesn't rust!
Thanks to the extremely low weight of only 25kg, it is also perfect for larger and heavy snow masses!

Thanks to the special ribbing of the Plastic sign is this Snow blade / Sideshift so resilient and Powerful as a Snow blade made of metal or even stronger!!!

Our Snow blade is a complete winter package and Made in Europe.
The Snow blade has a lifetime warranty.

For side adjustment:

The snow blade is easily positioned hydraulically at the desired angle at the push of a button.
In the side adjustment kit for Snow blade All necessary parts are included. The kit is easy to install within approx. Assembled in 1-2 hours.
Normally no changes need to be made for assembly.
The kit has two hydraulic tanks with a pressure relief valve so that you can finish your work safely and quickly, even under extreme conditions.

Scope of delivery:
Hydraulic pump, dual cylinders, hydraulic hoses, mounting brackets and fastening material, wiring, switch for easy handlebar operation, all mounting parts and adapters and detailed mounting instructions.
This is how you can convert your ATV into a real work machine!

The assembly of the snow shield takes place under the ATV that's how it will be force more evenly on the vehicle distributed.
The drawbar is easily attached to the frame with 2 bolts and clips.
The Snow blade has a professional folding device to protect the vehicle and the sign from large stones, uneven paths or other obstacles.
The Snow blade has proven itself very well in the USA and Canada and has been in use there for many years!
The included mounting plate makes it complete Snow blade Kit on your ATV installed quickly and easily.
You can also mount numerous other modules on the adapter, such as a trailer hitch, load carrier, sweeper, etc. (See film)

Scope of delivery:
Snow blade in black plastic profile with dimensions 132cm wide (52" inches)
Special drawbar complete for extreme loads, ideal even in extremely deep snow!
Special mounting plate for Explorer Everest 500/600, suitable for this winter package complete kit.
76.2mm extra thick metal scraper bar that can be used on both sides
2x spacers/grinders for the correct distance to the floor.

Technical data:
Weight of the shield: 25kg
Width: 132cm
Height: 48cm
Material shield: Poly special plastic
Material adapter: steel, extra robust design
Scraping bar: Extra thick, can be used on both sides, extra high at 76.2mm
Side adjustment: 5-fold left/right

After installation you can Snow blade Easy and quick to adjust sideways a total of 5 times in both directions quickly and without tools.
This means you can not only determine the width, but also which side the snow should be cleared.
Also perfect for narrow paths where it can be up to the actual width of the vehicle.
Easy to install in less than 30 minutes!
Should be an original Underrun protection If it is installed, it usually does not need to be removed!

The optional hydraulic side adjustment is a useful helper.
(Not included in the delivery!)
With the hydraulic side adjuster you can quickly and easily swing the snow blade from one side to the other at the push of a button!

For raising and lowering the snow shield will be one Winch needed.
We recommend our winch 35001D.

Find a professional one Quick shield, which is easy to use?
Then this is it Snow blade the right choice!
With German operating and assembly instructions!

The Snow blade is easy and quick to install in less than 30 minutes without any prior technical knowledge.