Diamond & CBN-stones from Ukraine have some difficulties:
*****
Since the PDTools (UKRAINE) factory is experiencing difficulties of war, the plant reserves the right not to paint aluminum backing plates for sharpening stones, so some sharpening stones from Ukraine may not be painted and may be differ from the photos, but HOWEVER THIS DOES NOT AFFECT THE PERFORMANCE CHARACTERISTICS OF THEM OF ABRASIVE MATERIAL inside THE SHARPENING STONES!
Attention:
The guarantee of the factory products from Poltava city PDTools (UKRAINE) is their gluing on a 4 mm backing plates in the factory way - for other sharpening bars, glued on a 3 mm backing plates (Hapstone, Gritomatic etc.), the factory DOES NOT BEAR RESPONSIBILITY AND DOES NOT GIVE a factory guarantee for those sharpening stones:
Attention:
Warning: PDTools trademark on the back of the aluminum's backing blanks 5/32” = 4 mm (See Attached picture from their booklet) high, can guarantee that you have purchased the PJSC Poltava Diamond Tools Superabrasives factory’s product for the American market from the Authorized dealer in North America (See Attached photo of our certificate)!
*******
https://www.youtube.com/watch?v=jAk0VASJx0k
*******
https://www.youtube.com/watch?v=qtsX5jxz6g8
*******
https://www.youtube.com/watch?v=3g3pABq_tjM (Explained: the differences between CBN metallic and Diamond resin)
*******
https://www.youtube.com/watch?v=B3M8Xn-FXiA&t=5s
*******
FeedBaсk
*******
F 650 (25mm):
PDTools, DIAMOND-stone Apex Edge Pro Ruixin TSPROF Ganzo.
We Are
Selling an Original Product
(Guys,
Beware of Scammers! https://www.youtube.com/watch?v=r63OK8DQyCg)
Because Of
We Are the Official Dealer of the PDT-Factory, Ukraine in North America (See
Attached Photos).
Polyamide OSB - unique modified binder (organic resin).
Tips:
Question from: marbalie-0
(148)
Are these
stones resin bonded or electroplated? Not really seeing specifics.
Answer:
These
stones are bonded by organic resin - Polyamide OSB
FeedBaсk
From the previous Buyer from the
USA: reno_raines99_5 (84) US $ 515.00
The EXPERT Set / 25mm – CBN sharpen/honing stone Edge Pro
Ruixin TSPROF Hapstone (#175387035682)
F 650 Grit DIAMOND sharpening/honing stones 150-25-7-3
to Edge Pro Ruixin TSPROF Hapstone (see on 2:09 minutes
on video: https://youtu.be/RAy8olk8cMo)
About this item:
· 650
Grit – U.S. Standard ANSI
· DIAMOND
sharpening stones, Poltava, working surface:
· 5
29/32" x 63/64" x 1/8"
· (150 x
25 x 3 mm)
· Length:
150 mm = 5.91 inches
· Width:
25 mm = 0.98 inches
· Thickness:
3 mm = 0.12 inches
· REMEMBER
– It was mounted to aluminum plate: 160 x 25 x 4 mm.
· Material: DIAMOND. It
has the best cost/productivity ratio for processing STEEL, compared to cheaper
stones.
DIAMOND stones
are similar in qualities to Japanese whetstones but have had ten times longer
working life.
· DIAMOND
can be used without lubricants.
· Compatible
with Edge Pro, RUIXIN, TSPROF, Hapstone etc.
· Durable
Polyamide OSB - unique modified binder (organic resin) - bonding! Created by
PDTools plant, UKRAINE.
· Working
surface: 150 x 25 x 3 mm (5 29/32" x 63/64" x 1/8"), mounted on
4 mm aluminum blank.
· Sharpening
stones overall dimensions (with aluminum blank): 160 x 25 x 7 mm (6 19/64"
x 63/64" x 9/32")
Attention:
Warning: PDTools trademark on the back of the
aluminum blanks 5/32” = 4 mm (!) high, can guarantee that you have purchased
the PJSC Poltava Diamond Tools Superabrasives factory’s product for the American market from the Authorized dealer in
North America (See attached photo of our certificate)!
*************
FeedBaсk
From the previous Buyer from the
USA: sim_js_hnori2 (26) US $ 515.00
The EXPERT Set / 25mm – CBN sharpen/honing stone Edge Pro
Ruixin TSPROF Hapstone (#175387035682)
From the previous Buyer from
Israel: o0o3bo0od-34 (2) US
$49.32
5/3μ (F 4,000) 25mm - DIAMOND sharpen/honing stone Edge Pro
Ruixin TSPROF Hapstone (#175335029704)
FeedBaсk
From the previous Buyer from
the USA: 815vladimir (858) US
$79.20
14/10μ(F 1,500)25mm-DIAMOND sharpen/honing stone Edge Pro
Ruixin TSPROF Hapstone (#325236057831)
To be,
or not to be, that
is the question:
BY WILLIAM SHAKESPEARE
(From Hamlet, spoken
by Hamlet)
Do you wanna “to be, or not to be” on the Top Level?
Do you wanna “to be, or not to be” on the Supreme Union?
Do you wanna “to be, or not to be” the BEST?
If you wanna TO BE, WE ARE
INTRODUCING TO YOU - what do you WANT:
THE NEW ERA ON the
sharpening’s community coming, and IT IS COMING NOW - Poltava Diamond
Tools factory, UKRAINE NOW IN THE USA!
👑We Are an Official
Representative PJSC PDT® (Ukraine)
in the USA👑
THE OFFICIAL PRODUCT
FROM PJSC PDT® IN SOUTH AND NORTH
AMERICA
👑 Lifetime Bonded Clutch
Warranty from PJSC PDT® 👑
So,
Put aside your Arkansas
stones - let them "rest",
Put your Naniwa’s stone
into some water before it starts to work - let them "drown"
in the water & "suck"
something,
Give your Boraide’s
sharpening stones away to your friends - let them "remember” you...
And
GO TO
MOVE ON DIAMOND from PDTools THAT GIVE YOU OPPORTUNITY:
v No fear of getting cancer
- no phenol-formaldehyde bonds, only the Polyamide OSB - unique modified binder
(organic resin).
v No parasitic scratches on
the cutting edge on your knives natural diamond did.
v No water or oil as
lubricants, and, as a result, no dirt on the worktable when you will be
sharpening your knives – DIAMOND works dry.
v There is no need to
prepare the sharpening stones for work - just "take it" and
"work with".
v No headaches with the
return of goods - send to the factory a passport with the serial number on the
sharpening bar and receive a new sharpening stone without complain (in the
absence of signs of strong mechanical impact or deliberate damage).
v Lifetime factory warranty
until the grinding mass disappears in the stone (it is 1,5 mm)
v
So, ARE YOU “IN’ or “OUT”?
v
Description
DIAMOND Sharpening
Stones are used for sharpening knives using Edge Pro,
Ruixin, Hapstone, TSPROF etc. sharpeners. DIAMOND is the hardest material IN
THE WORLD. Polyamide OSB - unique modified binder (organic resin) alloy bonding
for high endurance and low wearing rate.
DIAMOND Stones consists
of a 3,0 mm diamond plate mounted on a 4,0 mm a high-quality aluminum blank and
painted.
DIAMOND qualities
include high levels of high hardness, strength, abrasion resistance, and
thermal and chemical resistance.
DIAMOND offers excellent
performance in sharpening knives of any steel. Due to its high resistance
specs, DIAMOND can be used dry without lubricant. This makes DIAMOND the
cleanest of the available sharpening stones.
How to
use
DIAMOND can be
used without lubricants.
DIAMOND stones may have
tone imperfections. DIAMOND may become darker over time due to the natural
resin oxidizing, BUT it does not affect the sharpening.
DIAMOND stones do not
require any preparations.
Q
& A
· DIAMOND
sounds like a wonderful abrasive that is far better than anything else on the
market. So, what's the catch?
DIAMONDS provides high performance, sharpens any steel, has
low wear rate and low stress, does not create mess, and does not leave unwanted
grooves. The price tag is expensive. However, remember that knives guaranteed
by the manufacturer that you will be sharpening MUCH EFFECTIVELY!
· Can I
sharpen ceramic knives with DIAMOND?
Theoretically,
yes. However, sharpening ceramic knives is technically difficult and
uneconomical in most cases. DIAMOND stones can cause microchipping when used on
ceramics. Consider purchasing a new ceramic knife instead of sharpening it.
· What
is PDTools means, it printed on the sharpening blanks?
The
PDTools, Ukraine is an abbreviation for the name of the "Poltava Diamond
Tools" plant in Ukraine - the manufacturer of these sharpening blanks made
from diamonds and CBN: https://youtu.be/lOcRcQfGYMk .
Please, note that if there are any problems
with your order, contact us first via eBay giving full details of any problem along with
your user ID - Before leaving any Negative or Neutral feedback please
reach out to us, we will resolve the issue as quickly as possible :-).
Grit |
Micron |
Purpose |
📈80
grit |
200/165 μm |
Optional/Alternative |
📈160
grit |
125/100 μm |
🔢Recommended
as #1 |
📈320 grit |
60/40 μm |
Optional/Alternative |
📈460
grit |
40/28 μm |
🔢Recommended
as #2 |
📈650
grit |
28/20 μm |
Optional/Alternative |
📈1500
grit |
14/10 μm |
🔢Recommended
as #3 |
📈3000
grit |
7/5 μm |
Optional/Alternative |
📈4000
grit |
5/3 μm |
🔢Recommended
as #4 |
📈5000
grit |
3/2 μm |
Optional/Alternative |
📈10000
grit |
2/1 μm |
🔢Recommended
as #5 |
📈15000
grit |
1/0 μm |
Optional/Alternative |