Mark Bass Little Mark Tube Bass Guitar Amplifier 500w Head Amp

Product Information The Little Mark Tube gives the warmth and richness of a tube preamp, or the clean attack of a solid state preamp… or a mix of both! On the front panel there are also two inputs with separate gain controls: one 1/4” jack, and one combo jack that accepts either a XLR or 1/4” cable. Additional features include switchable 48V phantom power for the XLR input, solid-state/tube mix control, four bands of equalization, VLE and VPF filters, line out level control, pre-post EQ switch for the XLR out (on rear panel), and mute control (push-pull on the master knob). Specifications INPUTSINPUT 1: impedance 500 Kohm, max. voltage 15 VppINPUT 2: (Balanced XLR/1/4" combo) with Phantom PowerBALANCED: impedance 500 Kohm, max. voltage 15 Vpp, phantom power 48VEFFECT RETURN: impedance 33 Kohm, max. voltage 10 VppCONTROLSGAIN 1: -60 dB to +23 dB rangeGAIN 2: -60 dB to +23 dB rangeMIX: mixes tube and solid state gainMASTER VOLUME LINE OUT LEVEL GROUND LIFT (switch on rear panel)PRE/POST EQ (switch on rear panel)MUTE (push/pull on master knob)PHANTOM POWER switch (on INPUT 2 / Balanced)EQUALIZATIONLOW: center frequency 40 Hz; level: ±16 dBLOW MID: center frequency 360 Hz, level: ±16 dBHIGH MID: center frequency 800 Hz, level: ±16 dBHIGH: center frequency 10 kHz, level: ±16 dBVPF (Variable Pre-shape Filter) center frequency 380 Hz VLE (Vintage Loudspeaker Emulator) frequency range 250 Hz-20 kHz OUTPUTSLINE OUT: balanced XLR, max. voltage 20 VppEFFECT SEND: unbalanced, max. voltage 20 Vpp (pre-EQ)TUNER OUT: unbalanced, max. voltage 2 VppSPEAKER OUT: speakon/1/4" combo, 1/4"OTHERWEIGHT: 5.07 lbs / 2.3 KgWIDTH: 10.87 in. / 27.6 cmDEPTH: 9.84 in. / 25 cmHEIGHT: 3.27 in. / 8.3 cmOUTPUT POWER: 500W RMS @ 4 ohms / 300W RMS @ 8 ohmsPOWER REQUIREMENT: 100/120V; 230V; 240V - 50/60Hz (Voltage is factory preset according to region of sale)Minimum ohm load for all Markbass heads is 4 ohms.Markbass amps/combos are manufactured to be sold and used in the country of purchase, and they are factory preset to that country’s voltage. Due to homologation issues, the voltage may not be changed.Rack ears do not come included with this head.Product specifications are subject to change without notice.

Mark Bass Little Mark Tube Bass Guitar Amplifier 500w Head Amp


Product Information

The Little Mark Tube gives the warmth and richness of a tube preamp, or the clean attack of a solid state preamp… or a mix of both! On the front panel there are also two inputs with separate gain controls: one 1/4” jack, and one combo jack that accepts either a XLR or 1/4” cable. Additional features include switchable 48V phantom power for the XLR input, solid-state/tube mix control, four bands of equalization, VLE and VPF filters, line out level control, pre-post EQ switch for the XLR out (on rear panel), and mute control (push-pull on the master knob).

Specifications

INPUTS
INPUT 1: impedance 500 Kohm, max. voltage 15 Vpp
INPUT 2: (Balanced XLR/1/4" combo) with Phantom Power
BALANCED: impedance 500 Kohm, max. voltage 15 Vpp, phantom power 48V
EFFECT RETURN: impedance 33 Kohm, max. voltage 10 Vpp
CONTROLS
GAIN 1: -60 dB to +23 dB range
GAIN 2: -60 dB to +23 dB range
MIX: mixes tube and solid state gain
MASTER VOLUME
LINE OUT LEVEL
GROUND LIFT (switch on rear panel)
PRE/POST EQ (switch on rear panel)
MUTE (push/pull on master knob)
PHANTOM POWER switch (on INPUT 2 / Balanced)
EQUALIZATION
LOW: center frequency 40 Hz; level: ±16 dB
LOW MID: center frequency 360 Hz, level: ±16 dB
HIGH MID: center frequency 800 Hz, level: ±16 dB
HIGH: center frequency 10 kHz, level: ±16 dB
VPF (Variable Pre-shape Filter) center frequency 380 Hz
VLE (Vintage Loudspeaker Emulator) frequency range 250 Hz-20 kHz
OUTPUTS
LINE OUT: balanced XLR, max. voltage 20 Vpp
EFFECT SEND: unbalanced, max. voltage 20 Vpp (pre-EQ)
TUNER OUT: unbalanced, max. voltage 2 Vpp
SPEAKER OUT: speakon/1/4" combo, 1/4"
OTHER
WEIGHT: 5.07 lbs / 2.3 Kg
WIDTH: 10.87 in. / 27.6 cm
DEPTH: 9.84 in. / 25 cm
HEIGHT: 3.27 in. / 8.3 cm
OUTPUT POWER: 500W RMS @ 4 ohms / 300W RMS @ 8 ohms
POWER REQUIREMENT: 100/120V; 230V; 240V - 50/60Hz (Voltage is factory preset according to region of sale)
Minimum ohm load for all Markbass heads is 4 ohms.
Markbass amps/combos are manufactured to be sold and uséd in the country of purchase, and they are factory preset to that country’s voltage. Due to homologation issues, the voltage may not be changed.
Rack ears do not come included with this head.
Product specifications are subject to change without notice.

Postage info

Click the Postage tab above the listing description for more info

Additional delivery notes

Click the Postage tab above the listing description for all postage info. If we can't dispatch your item via your selected option, for whatever restriction, we will then dispatch with the nearest replacement carrier.

PICK UP OPTION

Our items are available for pick-up. Pick up procedure is as follows:

  1. Purchase the item through eBay
  2. Email us to coordinate pickup from our Bass Hill store

PAYING VIA PAYPAL


We accept PayPal on our all our items so you can shop with confidence.

Simple choose the PayPal option when proceeding through the checkout.

Additional Information

At Belfield Music we try to answer every query we receive as quick as possible. With email sent after hours EST and weekends we will do our best to ensure these are answered the next business day. We appreciate your understanding and patience in this matter.

Ask seller a question

To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.

Ask seller a question

© Belfield Music Pty Ltd - ABN 99-160-283-258

Click the Postage tab above the listing description for more info

  • All items are sent via Australia Post or Courier
  • If we can't dispatch your item via your selected carrier, for whatever restriction, we will then dispatch with the nearest replacement carrier.
  • All items are carefully packaged to ensure they arrive safely
  • We only ship to Australia
  • If you require international shipping please contact us before purchasing
  • Express Post is available, please send though your post code for a quote.

Accepted Payment Methods

  • PayPal

Returns are accepted

We sincerely thank you and appreciate your business. Our primary goal is the make you a satisfied customer. We understand that in some cases you may wish to return the item for a refund.

  • Your payment must have been received by its due date (3 days after purchase)
  • Items must be returned within 30 days of the auction ending
  • Buyer will need to arrange return shipping & shipping and insurance costs are not refundable
  • Returned items must be in the original condition with all packaging and contents, not used or altered
  • Customers must request a return authorisation prior to returning
  • Upon receipt the item will be inspected by us to ensure everything is in order before the refund is processed.
  • Abuse of our return policy will not be tolerated. We reserve the right to refuse full refund for excessive returns by a customer.