ICA5S.

New but old stock.

Qty 4 (2 pre wired/2 unwired).

All tested on a precision dummy simulation box.

The ICA series of In-Cell/Miniature Amplifiers are designed for applications where it is not possible to fit a larger amplifier due to space constraints, or where a direct amplified output is required from a sensor. The amplifiers will provide a standard industrial output from the mV/V output of load cells that is easier to connect to data loggers and other monitoring equipment. 4-20mA output.

Amplifiers can be housed in a die-cast enclosure to work as an in-line signal conditioner with cable glanded exits, or as the basic multi-layers printed circuit board for integration into your own equipment. (Not supplied in die-cast enclosure).

The ICA5S is a standard stability variant of the ICA models and has a a lower perfomance and accuracy. The 2 wire excitation provided to the amplifier decreases as the load cell's impedance decreases, resulting in a reduction in the load cell's output. The drop in the output signal requires more gain from the IC5S to ccompensate, leading to a degradation in performance with regards temperature stability and noise performance. Impedence greater than 1000 Ohms and sensitivities of 1mV/V and higher are recommended.