NEW INA240 Voltage Monitor Sensor Module Bi-directional Current Power Monitoring
Product features:
1. INA240 module is a voltage output, current detection amplifier
2. Enhanced PWM suppression to detect voltage drop across the shunt resistor over a wide common-mode voltage range of -4V to 80V independent of the supply voltage
3. Negative common-mode voltage allows the device to operate below ground voltage, thus accommodating typical solenoidal applications where low power consumption during flyback cycles is a critical issue
Enhanced PWM suppression provides a high level of suppression of large common-mode transients (∆V/∆t) in systems using pulse-width modulated (PWM) signals, such as motor drives and solenoid control systems
5. Accurate current measurement without large transients in the output voltage and corresponding recovery ripple
1. INA240 module is a voltage output, current detection amplifier
2. Enhanced PWM suppression to detect voltage drop across the shunt resistor over a wide common-mode voltage range of -4V to 80V independent of the supply voltage
3. Negative common-mode voltage allows the device to operate below ground voltage, thus accommodating typical solenoidal applications where low power consumption during flyback cycles is a critical issue
Enhanced PWM suppression provides a high level of suppression of large common-mode transients (∆V/∆t) in systems using pulse-width modulated (PWM) signals, such as motor drives and solenoid control systems
5. Accurate current measurement without large transients in the output voltage and corresponding recovery ripple
Product parameters:
Module type: high / low side, bidirectional, zero drift current detection amplifier, PWM suppression function
Chip model: INA240A2
Wide common-mode voltage range: -4V to 80V
Fixed gain: 50V/v
Power supply range: 3.0V-5.0V
Current detection range: determined by sampling resistance, gain and power supply
Common mode rejection ratio: 132dB DC/93dB AC (50kHz)
Sampling mode: High/low side are available, related to the wiring method
Sampling resistance: 2512-0.1R, users can also configure their own
Operating ambient temperature: -25℃ < TA<85℃
Module size: 2*2.1MM
Application scope: applicable to motor control, power management, solenoid and valve control brake control, pressure regulator, etc.
Module type: high / low side, bidirectional, zero drift current detection amplifier, PWM suppression function
Chip model: INA240A2
Wide common-mode voltage range: -4V to 80V
Fixed gain: 50V/v
Power supply range: 3.0V-5.0V
Current detection range: determined by sampling resistance, gain and power supply
Common mode rejection ratio: 132dB DC/93dB AC (50kHz)
Sampling mode: High/low side are available, related to the wiring method
Sampling resistance: 2512-0.1R, users can also configure their own
Operating ambient temperature: -25℃ < TA<85℃
Module size: 2*2.1MM
Application scope: applicable to motor control, power management, solenoid and valve control brake control, pressure regulator, etc.
Product List:
1* Module
1* Row of pins
1* Module
1* Row of pins
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please keep in touch with us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
- We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
- We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
- Payment must be received in 5 business days of auction closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Il 19-mag-2023 alle 06:06:19 CEST, il venditore ha aggiunto le seguenti informazioni sulloggetto: