Compatibility

Compatible with SANWA FH3/FH4T remote control system.

Suitable for remote control M12, M11X, EXZES X, MT-4, GEMINI X, MT-S, MT-4S, M12S, M17. 

Exr62-sa is a small vehicle receiver compatible with Sanwa fh3/fh4 protocol for 1:18~1:10~1:8. With its small size, it can be easily installed on any frame.

Characteristics: 

Size: 21.0*21.4*12.9mm; 

weight: 4.2g; 

working voltage: 3.5~9.0v; 

ultra short antenna (31mm); 

built in bind switch; 

compatible with Sanwa fh3/fh4 protocol;

Bind process: first press the bind switch on the receiver, then power on the receiver (at this time, the LED on the receiver flashes), then adjust the remote control to the bind interface and set it to fh3 or fh4 mode, and finally start the frequency matching operation. 

When the LED on the receiver changes from low-speed flashing to fast flashing and then goes out, it means that the frequency matching is successful. 

When the LED on the receiver is always on, it means that the receiver has received the signal from the remote control. When the LED on the receiver is off, it means that the receiver has not received the signal from the remote control. 

Antenna: exr62-sa adopts ultra short antenna design. Users should erect the antenna after receiving the product, so as to achieve the best effect. 

Note: keep the antenna away from carbon plate and metal parts as far as possible during use!